System Features Menus; Feature Descriptions - Directed Electronics K10 Installation Manual

Directed electronics, inc. installation guide
Table of Contents

Advertisement

system features menus

Feature
Default LED ON Setting
Number
(Press Channel 1)
1
Active arming
2
Chirps ON
3
Ignition-controlled door lock ON
4
Ignition-controlled door unlock ON
5
Active locking
6
Ignition-controlled domelight ON
7
0.8 second door lock pulses
8
Double pulse unlock OFF
9
Security features ON
10
Code Hopping ON

feature descriptions

1 ACTIVE/PASSIVE ARMING: When active arming is selected, the starter kill will arm (if connected)
only when the transmitter is used. When set to passive arming, the starter kill will arm (if connected)
30 seconds after the ignition key is turned off.
2 CHIRPS ON/OFF: This feature controls the chirps that confirm arming and disarming of the system.
A siren or horn must be connected to the H1/10 BROWN wire.
3 IGNITION CONTROLLED DOOR LOCK ON/OFF: When turned on, the doors will lock three seconds
after the ignition is turned on.
4 IGNITION CONTROLLED DOOR UNLOCK ON/OFF: When turned on, the doors will unlock when the
ignition is turned off.
5 ACTIVE/PASSIVE LOCKING: If passive arming is selected in Feature 1, then the system can be pro-
grammed to either lock the doors when passive arming occurs, or only lock the doors when the system
is armed with a transmitter. Active locking means the doors will not lock when the system passively
arms. Passive locking means that the doors will lock whenever the system passively arms the starter kill
(if connected).
6 IGNITION CONTROLLED DOMELIGHT: If turned on, the system will turn on the domelight for 30 sec-
onds when the ignition is turned off. The domelight supervision output (H1/4) wire must be connected
to an optional relay as described in the Primary Harness Wire Connection Guide.
7 DOOR LOCK PULSE DURATION: Some European vehicles, such as Mercedes-Benz and Audi, require
longer lock and unlock pulses to operate the vacuum pump. Programming the system to provide 3.5
second pulses will accommodate the door lock interface in these vehicles. The default setting is 0.8 sec-
ond door lock pulses.
LED OFF Setting
(Press Channel 2)
Passive arming
Chirps OFF
Ignition-controlled door lock OFF
Ignition-controlled door unlock OFF
Passive locking
Ignition-controlled domelight OFF
3.5 second door lock pulses
Double pulse unlock ON
Security features OFF
Code Hopping OFF
11

Advertisement

Table of Contents
loading

Table of Contents