Replace Oven Racks And Warming Drawer; Complete Installation; Gas Conversions; Lp Gas Conversion - KitchenAid KDRS807SSS - 30 Inch Dual Fuel Range Installation Instructions Manual

30" (76.2 cm) freestanding and slide-in dual fuel ranges
Hide thumbs Also See for KDRS807SSS - 30 Inch Dual Fuel Range:
Table of Contents

Advertisement

Available languages

Available languages

Replace Oven Racks and Warming Drawer

Replace oven racks in oven cavity. Replace warming drawer or
storage drawer.
To Replace Warming Drawer:
1. Align the drawer glides with the receiving guides.
2. Push drawer in all the way.
3. Gently open and close the drawer to ensure it is seated
properly on the slides.

Complete Installation

1. Check that all parts are now installed. If there is an extra part,
go back through the steps to see which step was skipped.
2. Check that you have all of your tools.
3. Dispose of/recycle all packaging materials.
4. Check that range level. See the "Level Range" section.
5. Use a mild solution of liquid household cleaner and warm
water to remove waxy residue caused by shipping material.
Dry thoroughly with a soft cloth. For more information, see
the "Range Care" section of the Use and Care Guide.
Gas conversions from Natural gas to LP gas; or from LP gas to
Natural gas must be done by a qualified installer.
WARNING
Explosion Hazard
Use a new CSA International approved gas supply line.
Install a shut-off valve.
Securely tighten all gas connections.
If connected to LP, have a qualified person make sure
gas pressure does not exceed 14" (36 cm) water
column.
Examples of a qualified person include:
licensed heating personnel,
authorized gas company personnel, and
authorized service personnel.
Failure to do so can result in death, explosion, or fire.
6. Read the "Range Use" section in the Use and Care Guide.
7. Plug power cord into appropriate outlet. Slide range into its
8. Turn on surface burners and oven. See the Use and Care
If range does not operate, check the following:
9. When the range has been on for 5 minutes, check for heat. If
If you need Assistance or Service:

GAS CONVERSIONS

1. Turn manual shutoff valve to the "closed" position.
final location. Check that the flexible conduit or power supply
cord are not bent.
Guide for specific instruction on range operation.
Household fuse is intact and tight, or circuit breaker has not
tripped.
Range is plugged into an outlet.
Electrical supply is connected.
See the "Troubleshooting" section in the Use and Care Guide.
the range is cold, turn off the range and check that the gas
supply line shutoff valve is open.
If the gas supply line shutoff valve is closed, open it, then
repeat the 5-minute test as outlined above.
If the gas supply line shutoff valve is open, close it, and
contact a qualified technician.
Please reference the "Assistance or Service" section of the
Use and Care Guide or contact the dealer from whom you
purchased your range.

LP Gas Conversion

WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip bracket to rear range foot.
Reconnect the anti-tip bracket, if the range is moved.
Failure to follow these instructions can result in death
or serious burns to children and adults.
To Convert Gas Pressure Regulator
A
A. To range
B. Manual shutoff valve "closed" position
C. Gas supply line
B
C
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents