Procedure Before Using The Multi-Screen Display Function; Setting The Virtual Display; Enable The Virtual Display Driver (Windows Only) - Epson BrightLink 475Wi Operation Manual

Using Multi-Screen Display
Procedure Before Using the Multi-screen Display
Function
1. Setting the Virtual Display s
In a Windows environment, enable the virtual display driver as
necessary. Also, for both Windows and Mac OS, set up the virtual display
arrangement.
2. Allocating the image to be projected s
Open the file to be projected, and then move the screen to the virtual
display according to the actual projection arrangement.
3. Projecting the allocated images s
Allocate a virtual display number to a projector that is connected
through the network, and then start projection.

Setting the Virtual Display

This chapter explains the virtual display for arrangement example 1.
p.24
s

Enable the virtual display driver (Windows only)

Enable the virtual display driver. Those users listed below do not have to
perform this operation. Go to procedure s "Adjusting the Virtual
Display" p.26.
• Those users who have enabled virtual displays installing EasyMP
Network Projection.
• For Mac OS users.
p.25
p.29
p.30
Procedure
A
Start Windows on the computer, and then select "Start" -
"Programs" (or "All Programs") - "EPSON Projector" -
"EasyMP Network Projection" - "Add-Remove EPSON Virtual
Display".
The Add-Remove EPSON Virtual Display screen is displayed.
B
Select the virtual display you want to use.
Up to four monitors can be added. In this example, a single virtual
display is to be used. When setting multiple virtual displays, select
as many displays as is necessary.
Any one of the displays can be selected.
C
Click "OK".
When you click OK, the drivers for the virtual display are enabled.
At this point, it is normal for the display to flicker. Wait for the
Add-Remove EPSON Virtual Display screen to close.
25