Procedure Before Using The Multi-Screen Display Function; Setting The Virtual Display; Enable The Virtual Display Driver (Windows Only) - Epson EMP-1825 Operation Manual

Using Multi-Screen Display
Arrangement example 2
Actual monitor
Virtual display
Actual monitor Image of virtual
image display
PowerPoint file presenter tools
Slide show using a PowerPoint file
Procedure before using the Multi-screen Display
Function
1. Setting the Virtual Display s
2. Allocating the image to be
projected s p.30
3. The Allocated Image is Projected
p.31
s

Setting the Virtual Display

The following explains how to allocate the computer image using
"Arrangement example 1".

Enable the virtual display driver (Windows only)

f
Enable the virtual display driverg. Those users listed below do not have to
perform this operation. Perform the "Virtual display arrangement"
(Windows), or "Virtual display arrangement" (Macintosh). s
• Those users who have enabled virtual displays installing EMP NS
Connection.
• Those users who are using Macintosh computers.
In a Windows environment, enable
p.24
the virtual displayg driver as
necessary. And, for both Windows
and the Macintosh, set up the
virtual display arrangement.
Open the file to be projected, and
then move the screen to the virtual
display according to the actual
projection arrangement.
Allocate a virtual display number
to a projector that is connected
through the network, and then start
projection.
p.25
24
23 page