Get a DVD containing BrightLink training videos! Just click the BrightLink Training Resources link on your desktop or go to www.epson.com/eduresources and request a DVD.
Connect Your Computer and Turn on the Projector Connect the USB cable directly to any available USB port on your computer. C onnect an HDMI or VGA cable from the projector to your computer. HDMI Turn on the projector by pressing the red button on the remote control.
If you are using Windows: Select or Start > All Programs or Programs > EPSON Projector > Easy Interactive Tools Ver. 2.00. If you see Easy Interactive Tools Ver. 2.00, the software is installed. If the software is not installed, follow the steps in the next column to install it.
See the BrightLink User’s Guide on your computer or on the CD in this Welcome Kit. • Go to the training section and watch a video or two at epson.com/brightlink (U.S.) or epson.ca/brightlink (Canada) or atomiclearning.com. Select from various image sources...
Use the Pens Your projector came with 2 pens that have different colored ends, orange and blue. Make sure one AA battery is installed in each pen. Power switch • T o turn on the pen, slide the power switch. The green light comes on briefly.
PrivateLine is a registered trademark of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice.