Adjust Performance Tab - Epson BrightLink 475Wi Operation Manual

Using Set options
Display Connection
Mode Selection window
on startup
Search method
on startup
Edit profile
Switch LAN
Restore Defaults
Set whether or not the Quick Connection
Mode/Advanced Connection Mode screen
is displayed when EasyMP Network
Projection starts.
Clear this checkbox once you have settled
on a regular startup method.
Select from the following projector search
methods executed when EasyMP Network
Projection is started.
Automatic search on startup
Specify search method after startup
Search with the last network
configuration
The Edit profile dialog box is
displayed.s p.36
Windows only
The Switch Network Adapter dialog box is
displayed. This is used when it is necessary
to switch the network adapter to be used
for a search when a computer has multiple
adapters.
By default, all of the network adapters are
used to perform a search. When a Wired
LAN is always used as the connection
method, select a Wired LAN adapter.
You can reset all adjustment values on the
General settings tab to their default
settings, except for Edit profile and Switch
LAN.

Adjust performance tab

Performance adjustment
slider
Transfer layered window
The performance can be set to Fast,
Normal, and Fine.
Set to Fast when movie projections are
interrupted.
Windows only (excluding Windows Vista
and Windows 7)
Set whether or not to transfer a layered
window.
The layered window is in use when
contents such as messages displayed on
the computer are not projected by the
projector. Select this checkbox to project
contents such as messages that use the
layered window.
Clear this checkbox if you do not want
the mouse pointer to flicker on the
screen.
39