Epson BrightLink 475Wi Operation Manual page 11

Two Connection Modes
You need to perform steps 1 to 4 only the first time you connect.
1. Install EasyMP Network Projection on the computer to be connected.
p.7
s
*
2. Make network settings on the computer and put it into network
connection status. s p.12
3. For Quick Connection Mode: Install the optional Wireless LAN unit
in the projector (if already installed, go to step 5).
For Advanced Connection Mode: Enable the Wired LAN or Wireless
LAN adapter in "Port Configurations". s Computer's documentation
4. Make network settings on the projector and put it into network
connection status. See your projector User's Guide.
5. Start EasyMP Network Projection on the computer and connect with
the projector. s p.13
* When the computer you are using is normally connected to the network,
you do not need to make network settings on the computer.
11