Epson BrightLink 475Wi Operation Manual page 14

Connecting to a Projector on a Network and Projecting
Procedure
A
Start EasyMP Network Projection.
For Windows
Select Start - Programs (or All Programs) - EPSON Projector -
EasyMP Network Projection - EasyMP Network Projection
V2.XX.
For Mac OS
Double-click the Applications folder of the hard drive volume in
which EasyMP Network Projection is installed, and then dou-
ble-click the EasyMP Network Projection icon.
B
Select "Quick Connection Mode" (only available when the
optional Wireless LAN unit is installed) or "Advanced
Connection Mode", and then click "OK".
The projector search results are displayed. To always connect using
Advanced Connection Mode, select Set the selected Connection
Mode as the default mode for future connections.
C
Select the projector you want to connect to, and then click
"Connect".
If the projector you want to connect to is not displayed in the search
results, click the Automatic search button. The search takes about
30 seconds.
For details on the connection screen, see "Using the Connection
Screen". s p.15
D
When Projector Keyword is set to "On" from the projector,
the Keyword entry screen is displayed. Enter the keyword
displayed on the LAN standby screen, and then click "OK".
When the connection is complete, the computer screen is
projected. The following EasyMP Network Projection toolbar is
displayed on the computer screen. You can use this toolbar to
operate the projector and make settings, and to disconnect the net-
work connection. For details on the toolbar, see "Using the
Toolbar". s p.18
q
When connecting from another computer, such as when changing
presenters, start EasyMP Network Projection from the computer you want
to connect. The computer that is currently connected is disconnected, and
the projector is then connected with the computer that is trying to connect
now.
If a connection is made while Disable interrupt connection is set, the
connection is not switched to another computer.
14