Cr_Autosetup Command; Cr_Fanmode Command; Other Status Read Command; Cr_Signal Command - Canon LV-5220 - Multimedia Projector SVGA Functional Specification

Expand Serial Command Functional Specification

9.11.14. CR_AUTOSETUP Command

Command "CR_AUTOSETUP_%1" [CR]
"KEYSTONE" --------- Specify Auto Keystone
%1
"PCADJ" ---------------- Specify Auto PC Adj.
Details Get Auto Setup setting status
Acceptable
Response
Unacceptable

9.11.15. CR_FANMODE Command

Command "CR_FANMODE" [CR]
Details Get selected Fan mode.
Acceptable
Response
Unacceptable

9.12. Other Status Read Command

9.12.1. CR_SIGNAL Command

Command "CR_SIGNAL" [CR]
Details Get information if there is signal or not.
Acceptable
Response
Unacceptable

9.12.2. CR_VMUTE Command

Command "CR_VMUTE" [CR]
Details Get No Show setting status.
Acceptable
Response
Unacceptable

9.12.3. CR_FREEZE Command

Command "CR_FREEZE" [CR]
Details Get Freeze setting status.
Acceptable
Response
Unacceptable
"000_%a" [CR]
When Keystone
"AUTO" ----------- Auto setting
"MANUAL" ------ Manual setting
%a "OFF" ------------- Off setting
When Auto PC Adj.
" O N " - - - - - - - - - - - - On setting
" O F F " - - - - - - -- - - - Off setting
"?" [CR]
"000_%a" [CR]
"L1" -------- Fan mode L1
%a
"L2" -------- Fan mode L2
"?" [CR]
"000_%a" [CR]
"ON" ------- There is signal
%a
"OFF" ------ No signal
"?" [CR]
"000_%a" [CR]
"ON" -------- Set No Show
%a
"OFF" ------- Cancel No Show
"?" [CR]
"000_%a" [CR]
"ON" --------- Set Freeze
%a
"OFF" -------- Cancel Freeze
"?" [CR]
Page 40 of 41