Download Print this page

Canon 7215 - LV XGA LCD Projector Specification

Expand serial command functional specification.
Hide thumbs

Advertisement

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
LV-5210/7215/7210
EXPAND SERIAL COMMAND
FUNCTIONAL SPECIFICATION
Page
1

Advertisement

   Related Manuals for Canon 7215 - LV XGA LCD Projector

   Summary of Contents for Canon 7215 - LV XGA LCD Projector

  • Page 1

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 LV-5210/7215/7210 EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATION Page...

  • Page 2: Table Of Contents

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 CONTENTS 1. Overtview 2. Serial Interface Specification 2.1 Communication Specification 2.2 Connection 3. Note for communications 4. Name Definition 5. Functional Execution Command table 5.1 Image Command Table 5.2 PC Control Command Table 5.3 VIDEO Control Command Table 5.4 Input Control Command Table 5.5 Screen Command Table...

  • Page 3

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.4.7 WBAL COMMAND 8.4.8 COLTEMP COMMAND 8.4.9 PROGV COMMAND 8.4.10 IMGE COMMAND 8.4.11 CF IMAGE ADJ COMMAND 8.5 PC Control command 8.5.1 CF_FSYNC COMMAND 8.5.2 CF_TDOTS COMMAND 8.5.3 CF_CLAMP COMMAND 8.5.4 CF_H-POS COMMAND 8.5.5 CF_V-POS COMMAND 8.5.6...

  • Page 4

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.11 Setting Command 8.11.1 CF_BBACK COMMAND 8.11.2 CF_DISPCOMMAND 8.11.3 CF_LOGOCOMMAND 8.11.4 CF_CEILCOMMAND 8.11.5 CF_REARCOMMAND 8.11.6 CF_RCODE COMMAND 8.11.7 CF_LANGCOMMAND 8.11.8 CF_ON-STACOMMAND 8.11.9 CF_P-MANECOMMAND 8.11.10 CF_P-MANETIMECOMMAND 8.11.11 CF_FANSPEEDCOMMAND 8.11.12 KEYDISCOMMAND 8.11.13 TERMINALCOMMAND 8.11.14 STANDBYMODEOCOMMAND 8.11.15 POINTERCOMMAND 8.11.16 FDEFAULTCOMMAND 8.11.17 LOGOCAPTURECOMMAND...

  • Page 5

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.5.3 CR-CLAMP COMMAND 9.5.4 CR-H-POS COMMAND 9.5.5 CR-V-POS COMMAND 9.5.6 CR-DDOTS COMMAND 9.5.7 CR-DLINECOMMAND 9.5.8 CR-PC STORECOMMAND 9.5.9 CR-SET PC ADJ COMMAND 9.6 Video Command 9.6.1 CR_SERSYSCOMMAND 9.7 Input Command 9.7.1 CR-INPUTCOMMAND 9.7.2 CR-COURCECOMMAND 9.7.3 CR-INPUT_%1COMMAND...

  • Page 6

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.12 Other Status Read Command 9.12.1 CR-SIGNAL COMMAND 9.12.2 CR-VMUTECOMMAND 9.12.3 CR-FREEZECOMMAND 9.12.4 CR-PTIMERCOMMAND 9.12.5 CR-TEMPWARNCOMMAND 9.12.6 CR-TEMPFAILCOMMAND Page...

  • Page 7: Serial Interface Specification

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 1 Outview 1.1 This Functional Specification defines communication functions such as Wireless Imager for LV-5210/7215/7210. 1.2 The Projector Firmware Ver.1.x-ready. 1.3 Commands are to communicate to such as Wireless Imager, but most commands control a remote projector with PC installed RS232C.

  • Page 8: Note For Communications

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 Note for communications 3.1 The expand command is defined one Command/one line that starts ”C” and ends carriage return (0x0D) 3.2 When a projector receives carriage return (0x0D), it starts decoding. -Functional Execution (Ex.) ”CF_BRIGHT_032”...

  • Page 9: Input Control Command Table

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 Functional Execution Command Table 5.1 Image Command Table Execute Command Item CF_BRIGHT_%1 [CR] Set Brightness value CF_CONT_%1 [CR] Set Contrast value CF_COLOR_%1 [CR] Set Color value CF_TINT_%1 [CR] Set Tint value CF_SHARP_%1 [CR] Set Sharpness value CF_GAMMA_%1 [CR] Set-GAMMA value...

  • Page 10: Screen Command Table

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 5.5 Screen Command Table Execute Command Item CF_SCREEN_%1 [CR] Select Screen size. CF_FLSCREN_%1 [CR] Set and Cancel Full Screen. CF_TRUE_%1 [CR] Set and Cancel True for Screen. CF_DZCENT_%1 [CR] Cancel DIGITAL zooms. CF_KEYSTONE_%1 [CR] Set Keystone CF_KYSTNMODE_%1 [CR] Set Keystone store MODE...

  • Page 11: Image Status Read Command Table

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 Status Read Command Table 6.1 IMAGE Status Read Command Table Status read command Item CR_BRIGHT [CR] Get Brightness CR_CONT [CR] Get Contrast CR_COLOR [CR] Get Color CR_TINT [CR] Get Tint CR_SHARP [CR] Get Sharpness CR_GAMMA [CR] Get-GAMMA CR_WBAL-R [CR]...

  • Page 12

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 6.6 Lamp Status Read Command Table Status read command Item CR_LAMPREPL [CR] Get information for lamp replacement time. CR_LAMPMODE [CR] Get lamp MODE status CR_PROJH [CR] Get projector total running time. 6.7 Sound Status Read Command Table Status read command Item CR_VOLUME [CR]...

  • Page 13

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 Error Code Table Error/ode Content -When receives data that cannot be decoded -Parameter determination error (digit number error, and incorrect letter included) NORMAL Reception(not error) The function is not available in the selected. MODE.

  • Page 14: Operation Requirements

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 Functional Execution Command 8.1 Format 1. The following format’s commands issued form a PC Pattern1:”CF_COMMAND” [CR] Pattern2:”CF_COMMAND_%1” [CR] CF_:Header COMMAND:Letters %1:Parameter(Letters) _:Space(To separate COMMAND and parameter) 2. When a projector decoded a received data and ready to receive the next Command, it will return acknowledgment.

  • Page 15: Cf_bright Command

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.4 IMAGE Command 8.4.1 CF_BRIGHT Command COMMAND “CF_BRIGHT_%1” [CR] “000-063”------ Directly select the Bright Setting Value “UP”---------------- Bright setting value +1 “DN”---------------- Bright setting value -1 Set the User control Bright Value The value set by the command will not be saved to the projector. Therefore, Details when ALL OFF the projector, the value will return to the original setting.

  • Page 16: Cf_tint Command

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.4.4 CF_TINTCOMMAND COMMAND “CF_TINT_%1” [CR] “000-063”------ Directly select for Tint setting value “UP”---------------- Current Setting value +1 “DN”---------------- Current Setting value-1 Set the user Control tint value. The value set by this command will not be save to the projector. Therefore, Details when ALL OFF the projector, the value will return to the original setting.

  • Page 17: Wbal Command

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.4.7 CF_WBAL-COMMAND COMMAND “CF_WBAL-%1_%2” [CR] “R” ------------- RED “G” ------------- GREEN “B” ------------- BLUE “000-063”-- Directly select color value by White Balance %1 determination “UP”------------ Color value for White Balance %1 determination +1 “DN”------------ Color value for White Balance %1 determination -1 Set the user Control value by white balance %1 determination.

  • Page 18: Cf Image Adj Command

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.4.10 CF_IMAGECOMMAND COMMAND “CF_IMAGE_%1” [CR] “STAND” ----- Standard(Image adjustment is set to factory default setting value) “REAL” ------ High contrastl(Fixed value to display a graphic image with natural tone.) “CINEMA” ---- Cinema(Fixed value to focus on the tone reproduction for movie.)...

  • Page 19: Cf_tdots Command

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.5.2 CF_TDOTS COMMAND COMMAND “CF_TDOTS_%1” [CR] “nnnn-9999”-- Directly set Total Dots value “nnnn” is minimum value. This is current Display Dots value+Horizontal position value “UP”---------------- Total Dots setting value +1 “DN”---------------- Total Dots setting value-1 Set Total Dots of PC signal.(Only valid when it is in the usual Power ON status.)...

  • Page 20: Cf_v-pos Command

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.5.5 CF_V-POS COMMAND COMMAND “CF_V-POS_%1” [CR] “0000-nnnn”-- Directly set Vertical Position “nnnn” means maximum value. This value is from current Total Line value – display Line value. “UP”---------------- Vertical Position setting value +1. “DN”---------------- Vertical Position setting value-1 Set vertical position of PC signal.

  • Page 21: Cf_pc Storecommand

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.5.8 CF_PC STORECOMMAND COMMAND “CF_PCSTORE_%1” [CR] “MODE1” --- Store current PC Adjust status to MODE 1 “MODE2” ...Store current PC Adjust status to MODE 2 “MODE3” ...Store current PC Adjust status to MODE 3 “MODE4”...

  • Page 22: Cf_avdlinecommand

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.6.2 CF_AVDLINECOMMAND COMMAND “CF_AVDLINE_%1” [CR] “UP”....Current Setting+1 “DN”....Current Setting-1 Set AV service MODE vertical resolution value. (Only valid when it is in the usual Power ON status.) Details The setting value is stored in EEPROM. When ALL OFF the projector, the value will return to the original setting.

  • Page 23: Input Control Command

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 Acceptable “000” [CR] Response Unacceptable “101” [CR] ----Input-VIDEO 8.7 Input Control COMMAND 8.7.1 CF_INPUT COMMAND COMMAND “CF_INPUT_%1” [CR] “COMPUTER1”..Select COMPUTER 1 input “COMPUTER2”..COMPUTER 2 input “VIDEO”......VIDEO input Select Input.(Only valid when it is in the usual Power ON status.) The Command works as the same as the remote controls’s unit “INPUT”...

  • Page 24: Cf_system Command

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.7.3 CF_INPUT_%1_%2 COMMAND COMMAND “CF_INPUT_%1_%2” [CR] “COMPUTER1”..Select COMPUTER 1 input “COMPUTER2”..Select COMPUTER 2 input “VIDEO”....Select VIDEO input When %1 is COMPUTER1… “ANALOG”.... Select ANALOG RGB input “DIGITAL”..……Select DIV input “HDCP”....Select DCHP input When %1 is COMPUTER2 “ANALOG”....Select ANALOG RGB input “YPBPR”....Select Component input...

  • Page 25: Screen Control Command

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 Acceptable “000” [CR] Response Unacceptable “Error Code” [CR] 8.8 Screen Control COMMAND 8.8.1 CF_SCREENCOMMAND COMMAND “CF_SCREEN_%1” [CR] “NORMAL”....Select 4:3 “WIDE”....Select 16:9 Input is “TRUE”....Select TRUE COMPUTER “DZOOM_UP”..Zoom Out with DIGITAL zoom “DZOOM□DN”-- Zoom in with DIGITAL zoom Input is “NORMAL”...

  • Page 26: Cf_keystonecommand

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.8.4 CF_DZCENTCOMMAND COMMAND “CF_DZCENT_%1” [CR] “CENT”-----Cancel DIGITAL Zoom (CENT : “CENTER”) Cancel DIGITAL Zoom Details Only valid when it is n the usual Power ON state and Input is COMPUTER. Acceptable Acceptable Response Unacceptable Unacceptable 8.8.5...

  • Page 27: Lamp Command

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.9 Lamp COMMAND 8.9.1 CF_LAMPH COMMAND COMMAND “CF_LAMPPH_%1” [CR] “RST” Reset total lamp running time. (Only valid when it is in the usual Power ON Details status.) Acceptable “000” [CR] Response Unacceptable “Error Code” [CR] 8.9.2 CF_LAMP MODECOMMAND COMMAND...

  • Page 28

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 Acceptable “000” [CR] Response Unacceptable “Error Code” [CR] 8.11 Setting COMMAND 8.11.1 CF_BBACK COMMAND COMMAND “CF_BBACK_%1” [CR] “ON”------ Select Blue Back “OFF”---- Cancel Blue Back Set/cancel Blue Back. (Only valid when it is in the usual Power ON status.) Details The value set is stored in EEPROM.

  • Page 29

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.11.5 CF_REARCOMMAND COMMAND “CF_REAR_%1” [CR] “ON”------ Select Rear “OFF”---- Cancel Rear Set/Cancel Rear (Only valid when it is in the usual Power ON status.) When Rear is ON, it will be a mirror-reversed image. Details The value set is stored in EEPROM.

  • Page 30

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 Unacceptable “Error Code” [CR] 8.11.8 CF_ON-STACOMMAND COMMAND “CF_ON-STA_%1” [CR] “ON”------ Select Power On Start “OFF”---- Cancel Power On Start Set/Cancel Power ON Start. (Only valid when it is in the usual Power ON status.) Details The value set is stored in EEPROM.

  • Page 31

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 value will return to the original setting. Acceptable “000” [CR] Response Unacceptable “Error Code” [CR] 8.11.12 CF_KEYDISCOMMAND COMMAND “CF_KEYDIS_%1” [CR] N/A” --- RC and KEY are available “RC” ...Bar the use of RC “KEY”...

  • Page 32

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 Acceptable “000” [CR] Response Unacceptable “Error Code” [CR] 8.11.16 CF_FDEFAULTCOMMAND COMMAND “CF_FDEFAULT_%1” [CR] “RST” Set Factory Default. (Only valid when it is in the usual Power ON status.) Details Acceptable “000” [CR] Response Unacceptable “Error Code”...

  • Page 33

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 Status Read Command 9.1 FORMAT 1. PC issues Commands as below “CR_COMMAND” [CR] COMMAND: Character Line 2. When projector receives the appropriate Command, it returns a character line as the required data. “000_”%1 [CR] %1:Required Data (character line) 3.

  • Page 34

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.4.4 CR_TINTCOMMAND COMMAND “CR_TINT”[CR] Details Get Tint value of user Control Acceptable “000_%a”[CR] “000”-- ”063” Response “Error code”[CR] --- invalid Unacceptable “?”[CR] ------------- When receives unclear command 9.4.5 CR_SHARPCOMMAND COMMAND “CR_SHARP” [CR] Details Get SHARPNESS value of user Control Acceptable “000_%a”...

  • Page 35

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.4.9 CR_WBAL-BCOMMAND COMMAND “CR_WBAL-B” [CR] Details Get White Balance Blue of user Control Acceptable “000_%a” [CR] Response “000”-- ”063” Unacceptable “?” [CR] 9.4.10 CR_COLTEMPCOMMAND COMMAND “CR_COLTEMP” [CR] Details Get Color Temp setting status Acceptable “000_%a”...

  • Page 36

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.4.13 CR_IMGGMD COMMAND COMMAND “CR_IMGGMD” [CR] Details Get Standard/High Contrast/Cinema for image-GAMMA setting. Acceptable “000_%a” [CR] “STD”=Standard Response “REL”=High Contrast “CNM”=Cinema Unacceptable “?” [CR] 9.5 PC COMMAND 9.5.1 CR_FSYNC COMMAND COMMAND “CR_FSYNC” [CR] Details Get Fine Sync value Acceptable...

  • Page 37

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.5.4 CR_H-POS COMMAND COMMAND “CR_H-POS” [CR] Details Get Horizontal Position value Acceptable “000_%a” [CR] “0000”-”nnnn” Response (nnnn = Total Dots - Display Dots) “Error code” [CR] ---- Invalid Unacceptable “?” [CR] -------- When the projector received unclear command 9.5.5 CR_V-POS COMMAND COMMAND...

  • Page 38

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.5.8 CR_PC STORECOMMAND COMMAND “CR_PCSTORE” [CR] Get the status if MODE1-MODE5 is Free or Stored for PC Adjust. Each data MODE1-MODE5 will be shown in 5 bytes. Details (F:Free, S:Stored) Acceptable “000_%a” [CR] “FFFFF”--- All Free “SFFFF”--- Only MODE1 is Stored, and others are Free Required...

  • Page 39

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.7 Input COMMAND 9.7.1 CR_INPUTCOMMAND COMMAND “CR_INPUT” [CR] Details Get selected. INPUT No. Acceptable “000_%a” [CR] “COMPUTER1”..COMPUTER1 Input is selected. Response “COMPUTER2”..COMPUTER2 Input is selected.. “VIDEO”....VIDEO Input is selected. Unacceptable “?”...

  • Page 40

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.7.4 CR_SYSTEMCOMMAND COMMAND “CR_SYSTEM” [CR] Details Get selected. system Acceptable “000_%1” [CR] “MODE1” “MODE2” “MODE3” “MODE4” “MODE5” “AUTO” ....AUTO is selected. “NTSC” ....NTSC is selected. “NNTSC443”..NTSC4.43 is selected. “PAL” ....PAL is selected. Response “SECAM”...

  • Page 41

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.8.2 CR_FLSCRENCOMMAND COMMAND “CR_FLSCREN” [CR] Details Get the screen size status that Full Screen is selected. or not. Acceptable “000_%1” [CR] “ON”=Full Screen is set. Response “OFF”=Full Screen is not set. “Error code” [CR] ---- Invalid Unacceptable “?”...

  • Page 42

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.9.2 CR_LAMPMODECOMMAND COMMAND “CR_LAMPHMODE” [CR] Details Get lamp replacement time information Acceptable “000_%1” [CR] “NORMAL” Lamp MODE is NORMAL Response “ECO”Lamp MODE is silent “AUTO” Lamp MODE is AUTO Unacceptable “?” [CR] 9.9.3 CR_PROJHCOMMAND COMMAND “CR_PROJH”...

  • Page 43

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.11 Setting Status COMMAND 9.11.1 CR_BBACKCOMMAND COMMAND “CR_BBACK” [CR] Details Get Blue Back setting value Acceptable “000_%a” [CR] “ON”----- Set Blue Back Response “OFF”--- Cancel Blue Back Unacceptable “?” [CR] 9.11.2 CR_DISPCOMMAND COMMAND “CR_DISP”...

  • Page 44

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.11.5 CR_LANGCOMMAND COMMAND “CR_LANG” [CR] Details Get selected. language Acceptable “000_%a” [CR] “ENG”---- English is selected. “DEU”---- German is selected. “FRA”---- French is selected. “ITA”---- Italian is selected. “ESP”---- Spanish is selected. “POR”---- Portuguese is selected. Response “NED”---- Dutch is selected.

  • Page 45

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.11.9 CR_FANSPEEDCOMMAND COMMAND “CR_FANSPEED” [CR] Details Get Fan Control Speed Acceptable “000_%a” [CR] “MAX”--- Fan Control Speed is Max. Response “NOR”--- Fan Control Speed is NORMAL Unacceptable “?” [CR] 9.11.10 CR_KEYDISCOMMAND COMMAND “CR_KEYDIS” [CR] Details Get RC//KEY status Acceptable...

  • Page 46

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.11.13 CR_POINTERCOMMAND COMMAND “CR_POINTER” [CR] Details Get pointer setting status Acceptable “000_%a_%b” [CR] “SPOTLIGHT”..….. Spotlight Mode “ARROW”....Arrow Mode “FINGER”....Finger Mode “LASER”....Laser Mark Mode When SPOTLIGHT… Response “MAX”......Maximum “MID”...... Middle “MIN”...... Minimum When ARROW/FINGER/LASER…...

  • Page 47

    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.12.4 CR_PTIMERCOMMAND COMMAND “CR_PTIMER” [CR] Details Get Presentation Timer status Acceptable “000_%a” [CR] “ON”------- Presentation timer is active Response “STOP”--- Presentation timer is pause “OFF”----- Presentation timer is inactive Unacceptable “?” [CR] 9.12.5 CR_TEMPWARNCOMMAND COMMAND “CR_TEMPWARN”...

Comments to this Manuals

Symbols: 0
Latest comments: