Video Status Read Command; Cr_Sersys Command; Input Status Read Command; Cr_Input Command - Canon LV-5220 - Multimedia Projector SVGA Functional Specification

Expand Serial Command Functional Specification

9.6. Video Status Read Command

9.6.1. CR_SERSYS Command

Command "CR_SERSYS" [CR]
Get selected signal.
Details When Auto Mode, it returns by Auto-detect.
Only available when Input-Video. (Unavailable when Input is Computer)
Acceptable
Response
Unacceptable

9.7. Input Status Read Command

9.7.1. CR_INPUT Command

Command "CR_INPUT" [CR]
Details Get selected Input No.
Acceptable
Response
Unacceptable

9.7.2. CR_SOURCE Command

Command "CR_SOURCE" [CR]
Details Get selected Source.
Acceptable
Response
Unacceptable
"000_%a" [CR]
"1080I60" --------- 1080i 60Hz
"1080I50" --------- 1080i 50Hz
"1035I" ------------- 1035i
"720P" -------------- 720p
%a "575P" -------------- 575p
"480P" -------------- 480p
"575I" --------------- 575i (include composite signal such as PAL)
"480I" --------------- 480i (include composite signal such as NTSC)
"NO_SIGNAL" -- When no signal
"101" [CR] ------- When Input is PC series
"?" [CR]
"000_%a" [CR]
"COMPUTER1" ------ Computer1 Input is selected
%a "COMPUTER2" ------ Computer2 Input is selected
"VIDEO" ---------------- Video Input is selected
"?" [CR]
"000_%a" [CR]
"DIGITAL" -------- Digital Input is selected
"ANALOG" -------- Analog RGB is selected
"SCART" ----------- SCART RGB is selected
"HDCP" ------------ HDCP is selected
"VIDEO" ----------- Video Input is selected
%a
"S-VIDEO" --------- S-Video is selected
"YPBPR" ----------- YPBPR Input is selected
"MCI" --------------- MCI Input is selected
"WI" ----------------- Wireless Imager is selected
"NETWORK" ------ Network is selected
"Error code" [CR] ---- Invalid
"?" [CR] -------- When the Projector received unclear command
Page 33 of 41