Canon 7215 - LV XGA LCD Projector Specification page 12

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
6.6 Lamp Status Read Command Table
Status read command
CR_LAMPREPL [CR]
CR_LAMPMODE [CR]
CR_PROJH [CR]
6.7 Sound Status Read Command Table
Status read command
CR_VOLUME [CR]
CR_MUTE [CR]
6.8 Setting Status Read Command Table
Status read command
CR_BBACK [CR]
CR_DISP [CR]
CR_LOGO [CR]
CR_RCODE [CR]
CR_LANG [CR]
CR_ON-STA [CR]
CR_P-MANE [CR]
CR_P-MANETIME [CR]
CR_FANSPEED [CR]
CR_KEYDIS [CR]
CR_TERMINAL [CR]
CR_STANDBYMODE [CR]
CR_POINTER [CR]
6.9 Other Status Read Command Table
Status read command
CR_SIGNAL [CR]
CR_VMUTE [CR]
CR_FREEZE [CR]
CR_PTIMER [CR]
CR_TEMPWARN [CR]
CR_TEMPFAIL [CR]
Get information for lamp replacement time.
Get lamp MODE status
Get projector total running time.
Item
Get Volume value
Get sound mute setting value
Get Blue Back setting value
Get Display setting value
Get Log setting value
Get selected. remote Control code status
Get selected. language.
Get ON Start setting status
Get Power management setting status
Get the start time for Power management
F Get selected. FAN CONTROL SPEED
Get ＲＣ/ＫＥＹ prohibit status.
Get TERMINAL setting status.
Get STANDBYMODE Setting Status.
Get POINTER setting status.
Get the status if there is signal or no signal
Get No Show setting status
Get Freeze Setting Status
Get Timer operational status
Get if sensors are exceeding critical temperature or not
Get the temperature when sensors approached critical
temperature
Item
Item
Item
Page 12