Canon 7215 - LV XGA LCD Projector Specification page 41

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
9.8.2 CR_FLSCRENCOMMAND
COMMAND "CR_FLSCREN" [CR]
Details Get the screen size status that Full Screen is selected. or not.
Acceptable
Response
Unacceptable
9.8.3 CR_TRUECOMMAND
COMMAND "CR_TRUE" [CR]
Details Get information if the screen setting is True or not.
Acceptable
Response
Unacceptable
9.8.4 CR_ KYSTNMODECOMMAND
COMMAND "CR_KYSTNMODE" [CR]
Details Get Keystone Store MODE setting status
Acceptable
Response
Unacceptable
9.9 Lamp COMMAND
9.9.1 CR_LAMPREPLCOMMAND
COMMAND "CR_LAMPREPL" [CR]
Details Get lamp replacement time information
Acceptable
Response
Unacceptable
"000_%1" [CR]
"ON"＝Full Screen is set.
%a
"OFF"＝Full Screen is not set.
"Error code" [CR] ---- Invalid
"?" [CR] -------- When the projector received unclear command
"000_%1" [CR]
"ON".......... True is set.
%a
"OFF"...... True is not set.
"Error code" [CR] ---- Invalid
"?" [CR] -------- When the projector received unclear command
"000_%a" [CR]
"STR"-- "Store MODE" is Store
%a
"RST"-- "Store MODE" is Reset
"?" [CR] ........................ COMMAND
"000_%1" [CR]
"1Y"-- over the lamp replacement time
%1
"1N"-- have not reached the lamp replacement time
"?" [CR]
Page 41