Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01 Manual page 99

Configuring intrusion detection and prevention devices guide
Hide thumbs Also See for NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01:
Table of Contents

Advertisement

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Select Enable Syslog.
3.
Specify the syslog server IP address.
4.
Specify whether to forward packet logs to the syslog server.
5.
Click OK.
6.
NSM Logs and Reports Overview on page 129
Viewing Logs on page 129
Configuring an SNMP Agent (NSM Procedure) on page 81
Chapter 6: Configuring SNMP and Syslog Settings
83

Advertisement

Table of Contents
loading

Table of Contents