Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01 Manual page 25

Configuring intrusion detection and prevention devices guide
Hide thumbs Also See for NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01:
Table of Contents

Advertisement

Chapter 2: Understanding Intrusion Detection and Prevention Device Configuration and Integration Overview
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
When you change a parameter value in a template and save the template, the value
also changes for all the IDP device configurations that refer to that template, unless
specifically overridden in the device object.
For complete details on using device templates and configuration groups, see the Network
and Security Manager Administration Guide.
NSM and Intrusion Detection and Prevention Device Management Overview on page 5
Intrusion Detection and Prevention Services and Device Configurations Supported in
NSM on page 6
9

Advertisement

Table of Contents
loading

Table of Contents