Paper Feed Roller And Separator Pad Replacement - Brother HL-2400C Service Manual

2.7

Paper Feed Roller and Separator Pad Replacement

<Criterion of Replacement>
The paper feeding roller and separator pad should be replaced with new ones
according to the periodical maintenance cycle set out in Table 6-4.
When time is due for replacement of the paper feed roller and separator pad, the
following message appears on the control panel.
They also should be replaced when paper feed jams occur.
<Work Procedure>
1) Whenever paper feed jams occur, confirm the cause by following the
information in Section 3 of Chapter VIII.
2) If the paper jam still occurs, replace the paper feeding roller and separator pad
referring to Section 4.6.5 of Chapter VII.
• This is one of the periodic replacement items, not customer service. It should be
implemented upon request of the customer or at periodic maintenance.
• After replacement, confirm the improvement of image failure by test printing.
LJ READY 001P T1
REPLACE 120K KIT
Separator Pad
Paper Feeding
Roller
Fig.6-28
CAUTION
VI-29