HUANUO HNCM2 Instruction Manual
Monitor desk mount
Hide thumbs
Also See for HNCM2:
- Installation instruction (9 pages) ,
- Installation instruction (26 pages) ,
- Instruction manual (25 pages)
Advertisement
Quick Links
HUANUO
Monitor
Desk
Mount
Instruction
Manual
V6.o (A)
o
Model:
HNCM2
Thank you for choosing
this HUANUO product!
At HUANUO we strive to provide
you with the best quality products
and services
in the industry.
Should you have
any issues, please don't hesitate
to contact
us at
Technical
Support:
(US/CA)I -800-556-0533
Mon-Fri 8am - 8pm(CST)
(UK)44-808-196-3874
Mon-Fri 2pm - IOpm(UTC)
Other
Info:
support@huanuoav.com
support_jp@huanuoav.com(JP)
Website:
www.huanuoav.com
Advertisement
Related Manuals for HUANUO HNCM2
Summary of Contents for HUANUO HNCM2
- Page 1 Instruction Manual V6.o (A) Model: HNCM2 Thank you for choosing this HUANUO product! At HUANUO we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact...
- Page 2 IMPORTANT SAFETY INSTRUCTIONS •Please carefully read all instructions before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact our customer service at support@huanuoav.com. CAUTION: Avoid potential personal injuries and property damage! • Do not use this product for any purpose that is not explicitly specified in this manual.
- Page 3 Supplied Parts and Hardware for Step 1 pole C Clamp Plate C Clamp Plate M5x14mm Bolt M8x12mm Bolt f (x3) g (x2) Locking Plate MI O Washer Spring Washer Grommet Plate j(xl ) k(xl) Medium Allen Key Small Allen Key Bottom Bottom WI (x I)
- Page 4 Supplied Hardware for Step 4 h (x2) Supplied Hardware for Step 5 Medium Allen Key o (xl) Step Install the Pole to the Desktop Option A: Desk Clamp Assembly IA-I Medium Allen Key Small Allen Key IA-2 Desk 3 15/16 (70mm) (100mm) Plastic...
- Page 5 Option B: Grommet Base Assembl Phillips Screwdriver (Not Included) Note: 1. If the existing grommet hole comes with a plastic protector, remove it to ensure a flat surface before installing the desk mount. 2. If there is no grommet hole on your desk, mark the pilot hole on your desired position.
- Page 6 Step 3 Attach the VESA Plate to the Monitor or Laptop Tray Monitor with Flat Back Monitor with Curved Recessed Back For Laptop...
- Page 7 Secure the Monitor or Laptop Tray onto the Head of Swivel Step 4 3/8 in (1Omm) (Not Included) 4—2 Secure the Nut (h). Make sure the nut 4—1 Slide monitor onto head Swivel Arm (d) as shown in the above is installed before you rotate...
- Page 8 Slightly Adjust the Height of each Monitor If the monitor is lower, remove the nut [h] and turn the bolt counter clockwise with supplied Allen key [o] to raise the monitor. Install the nut [h] after the adjustment. Small Allen Key Use the Allen key [o] to slightly adjust the height of each monitor...
Need help?
Do you have a question about the HNCM2 and is the answer not in the manual?
Questions and answers