Multiscreen Display - Pioneer 507CMX - PDP - 50" Plasma Panel Operating Instructions Manual

Multiscreen display

The Plasma Display's multiscreen function allows the
simultaneous display of two inputs. The multiscreen
display include two modes, side-by-side and picture-in-
picture.
SPLIT
SUB INPUT
1
Press the remote control unit's SPLIT button.
Each time the button is pressed the multiscreen
display changes in the following order:
3 Side-by-side
OFF 2 Picture-in-picture 2
1 Side-by-side
The main screen is displayed on the left and the
subscreen on the right.
2 Picture-in-picture
The subscreen is displayed in one of the four corners
of the main screen.
2
Press the remote control unit's SUB INPUT button
to select the subscreen input source.
To exchange the main screen and subscreen
inputs:
Press the remote control unit's SWAP button.
÷ When the side-by-side mode has been selected:
The right and left sides of the display will switch; what
DISPLAY
was previously the main screen will now show the
subscreen, and vice versa.
÷ When the picture-in-picture mode has been selected:
What was previously the main screen image will now
appear in reduced size as the subscreen image, and
vice versa.
FREEZE
To change the position of the subscreen in
picture-in-picture mode:
Press the remote control unit's PIP SHIFT button.
PIP SHIFT
Each time the button is pressed, the position of the
subscreen moves in the following order:
SWAP
To display the currently selected input:
Press the DISPLAY button.
If the DISPLAY button is pressed while in multiscreen
mode, the main screen and sub-screen will each be
displayed with its currently selected input.
Notes
¶ When using the Plasma Display in a profit-making activity, or
when exhibiting images publicly, using the screen size function
to compress or stretch the image may result in infringement of
the copyrights of the image owners.
¶ If the multiscreen display is left on for an extended period of
time, or if the same multiscreen display is repeatedly shown
66.0
for short periods on an everyday basis, a residual image
pattern may be burned onto the screen.
¶ When selecting the side-by-side mode, the screen image may
R12
24
appear somewhat rougher, depending on the source used.
¶ The multiscreen mode will be canceled if a menu is opened, or
if POINT ZOOM is performed.
¶ The screen size cannot be changed during multiscreen display.
¶ The sound of the input selected in the main screen is
outputted when using the multiscreen function.
66.0
R12
24
3 Lower right 3 Upper right
Lower left 2 Upper left 2
Operation
23
En