Operation
Enlarging one part of the screen
(POINT ZOOM)
This Plasma Display allows enlarging of the screen image.
When enlarging the screen, the 5/∞/2/3 buttons can be
used to move the enlarged viewing area around the
screen.
÷ The range of zoom possible can be confirmed by viewing
the Zoom-Area subscreen at the upper right of the main
screen (A "+" mark will be displayed in the center). The
Zoom-Area subscreen is displayed for about three
seconds whenever the POINT ZOOM button, one of the
5/∞/2/3 buttons, or DISPLAY button is pressed.
MENU
1
Press the remote control unit's POINT ZOOM
button.
66.0
R12
24
22
En
÷ LEVEL1 .......... x1
÷ LEVEL2 .......... x1.5
÷ LEVEL3 .......... x2
÷ LEVEL4 .......... x3
2
DISPLAY
Notes
POINT
¶ During use of the POINT ZOOM function, the screen size
ZOOM
¶ When using the Plasma Display in a profit-making activity, or
5/∞/2/3
SET
¶ Pressing the POINT ZOOM and 5/∞/2/3 buttons again will
¶ If the input signal changes, or if the menu screen is displayed
Zoom-Area subscreen
Each time the POINT ZOOM button is pressed, the
zoom ratio alternates in the following order:
3 LEVEL1
3 LEVEL2
LEVEL4 2
LEVEL3 2
Using the 5/∞/2/3 buttons, move the screen to
the desired part of the image.
R12
24
cannot be changed.
when exhibiting images publicly, using the screen size function
to compress or stretch the image may result in infringement of
the copyrights of the image owners.
change the zoom ratio and the position of screen enlarged.
and the input is changed, or if the multiscreen mode is
selected, the POINT ZOOM function will be canceled.