Multiscreen Display - Pioneer PDP-4304 Operating Instructions Manual

Operation
1 DOT BY DOT
The input signal and the screen maintain a dot to line ratio
of 1:1 and is thus highly faithful to the source.
[PDP-5004, PDP-5014]
A
640 dots
1280 dots
(Illustration shows 640 x 480 input.)
[PDP-4304, PDP-4314]
* The PDP-4304 and PDP-4314 are designed with
horizontally oblong elements, with the result that
the image displayed will appear more oblong than
the original input signal.
A
640 dots
1024 dots
(Illustration shows 640 x 480 input.)
2 4:3
The display fills the screen as much as possible without
altering the aspect ratio of the input signal.
A
3 FULL
The display is presented with a widescreen aspect ratio
of 16:9 and fills the entire screen.
A
28
EN
Note
When viewing at aspect ratio 4:3 continuously for numerous
hours, or for repeated short periods of time each day, some after
image may be burned into the screen.
To avoid such burning of after images in the screen, use aspect
ratios other than 4:3 whenever possible, unless necessary to
avoid infringement of copyright.
480 lines

Multiscreen Display

768 lines
[PDP-5004, PDP-4304 only]
The plasma display's multiscreen function allows the
simultaneous display of two inputs. The multiscreen
display include three modes, 2-SCREEN, PinP , and PoutP .
480 lines
768 lines
1
Press the remote control unit's SPLIT button.
Each time the button is pressed the multiscreen
display changes in the following order:
1 2-SCREEN
The main screen is displayed on the left and the
subscreen on the right.
SPLIT
SUB INPUT
AXD1496
3 2-SCREEN 3 PinP 3 PoutP
INPUT1
DISPLAY
PIP SHIFT
SWAP
3 OFF
INPUT2