Part Names And Function; Front View - NEC 61XR3 Operation Manual

Part Names and Function

Front View

MENU/ENTER DOWN
MENU/ENTER DOWN
7
q Power
Turns the monitor's power on and off.
w Remote sensor window
Receives the signals from the remote control.
e POWER/STANDBY indicator
When the power is on ............................. Lights green.
When the power is in the standby mode ... Lights red.
r INPUT SELECT / EXIT
Switches the input.
The available inputs depend on the setting of "BNC
INPUT", "D-SUB INPUT", "RGB SELECT" and
"DVI SET UP".
Functions as the EXIT buttons in the On-Screen Menu
(OSM) mode.
Note: This plasma monitor has the capasity to display images when connected to European DVD players with a SCART
output signal, which is RGB with composite sync.
Your dealer can supply a special SCART cable, which will enable you to use the RGB with composite sync signal.
To obtain the special cable as well as for further information, please contact your dealer.
Please refer to page E-21 for selection of the correct mode in the on-screen manager.
VOLUME INPUT SELECT
UP LEFT/- RIGHT/+ /EXIT
VOLUME
UP LEFT/ - RIGHT/ +
6 5
INPUT SELECT
/EXIT
4 1
t LEFT/– and RIGHT/+
Enlarges or reduces the image. Functions as the
CURSOR ( /
(OSM) mode.
y VOLUME DOWN and UP
Adjusts the volume. Functions as the CURSOR ( /
) buttons in the On-Screen Menu (OSM) mode.
u MENU/ENTER
Sets the On-Screen Menu (OSM) mode and displays
the main menu.
WARNING
The Power on/off switch does not disconnect the plasma
display completely from the supply mains.
E-6
4-10
3 2
) buttons in the On-Screen Menu