Video Wall Setting - NEC 60XM5 - PlasmaSync - 60" Plasma Panel User Manual

Video Wall setting

Use this feature to configure a (2 2, 3 3, 4 4, 5 5,
5 1, 1 5) video wall.
On "OPTION3" menu, select "VIDEO WALL", then press
the MENU/ENTER button.
The "VIDEO WALL" screen appears.
VIDEO WALL
DIVIDER
POSITION
DISP. MODE
AUTO ID
IMAGE ADJUST
P. ON DELAY
PLE LINK
SEL. ADJ.
Note: A contingency method of shutting off the electric
power should be used in cases of emergency during video
wall setup.
DIVIDER
Set the video wall.
Example: Setting "2 2"
On "DIVIDER" of "VIDEO WALL" menu, select "2 2".
VIDEO WALL
DIVIDER
POSITION
DISP. MODE
AUTO ID
IMAGE ADJUST
P. ON DELAY
PLE LINK
SEL. ADJ.
Information
DIVIDER settings
OFF, 1: 1 Screen (Matrix display function does not work)
2 2: 4 Screens
3 3: 9 Screens
4 4: 16 Screens
5 5: 25 Screens
5 1: 5 Screens horizontally
1 5: 5 Screens vertically
* When you select 2 2, 3 3, 4 4, 5 5, 5 1, 1 5,
set the VIDEO WALL POSITION.
VIDEO WALL POSITION
Set the position of each display.
Example: Setting "4"
On "VIDEO WALL" menu, select "POSITION", then press
the MENU/ENTER button.
The "VIDEO WALL POSITION" screen appears.
Select "4" of "POSITION NO.".
VIDEO WALL POSITION
POSITION NO.
ADJ.
: OFF
: SPLIT
: OFF
: OFF
: OFF
EXIT RETURN
: 2 2
: SPLIT
: OFF
: OFF
: OFF
EXIT RETURN
4
EXIT RETURN
En-33
Information
VIDEO WALL POSITION settings
1 Screen: There is no need to set POSITION.
2 2 Screens
NO. 1 NO. 2
NO. 4 NO. 3
4 4 Screens
NO. 16 NO. 17 NO. 18 NO. 19
NO. 20 NO. 21 NO. 22 NO. 23
NO. 24 NO. 25 NO. 26 NO. 27
NO. 28 NO. 29 NO. 30 NO. 31
5 1 Screens
NO. 1 NO. 2 NO. 3 NO. 4 NO. 5
DISP. MODE
Select the screen mode between two choices (Splitting,
Blanking).
Example: Setting "BLANK"
On "DISP. MODE" of "VIDEO WALL" menu, select
"BLANK".
VIDEO WALL
DIVIDER
POSITION
DISP. MODE
AUTO ID
IMAGE ADJUST
P. ON DELAY
PLE LINK
SEL. ADJ.
Information
DISP. MODE settings
SPLIT: Combines enlarged screens and creates multiple
screens.
BLANK: Corrects misalignment of combined screen
portions and creates multiple screens.
AUTO ID
This feature automatically sets the ID numbers of multiple
displays connected to each other.
Example: Setting "ON"
Set the ID number for the No. 1 display on ID NUMBER
menu.
On "AUTO ID" of "VIDEO WALL" menu, select "ON",
then press the MENU/ENTER button.
AUTO ID
AUTO ID
1 2
4 3
WIRED CABLE
CONNECTION TURN
ADJ.
3 3 Screens
NO. 7 NO. 8 NO. 9
NO. 11 NO. 12
NO. 10
NO. 13 NO. 14 NO. 15
5 5 Screens
NO. 32 NO. 33 NO. 34 NO. 35 NO. 36
NO. 37 NO. 38 NO. 39 NO. 40 NO. 41
NO. 42 NO. 43 NO. 44 NO. 45 NO.46
NO. 47 NO. 48 NO. 49 NO. 50 NO. 51
NO. 52 NO. 53 NO. 54 NO. 55 NO. 56
1 5 Screens
NO. 1
NO. 2
NO. 3
NO. 4
NO. 5
: 1
: BLANK
: OFF
: OFF
: OFF
EXIT RETURN
: ON
1 2 3
8 9 4
7 6 5
EXIT RETURN