NEC 60XM5 - PlasmaSync - 60" Plasma Panel User Manual page 45

Vertical
Dots lines
Model
frequency
Signal Type
(Hz)
1280 1024
Work Station
(EWS4800)
Work Station (HP)
1280 1024
1152 900
Work Station
(SUN)
1280 1024
Work Station
1024 768
(SGI)
1280 1024
IDC-3000G
PAL625P
768 576
640 480
NTSC525P
*1 Only when using a graphic accelerator board that is capable of displaying 852 480.
*2 The picture is displayed in the original resolution.
*3 The aspect ratio is 5:4. This signal is converted to a 960 dots 768 lines signal.
*4 Normally the RGB select mode suite for the input signals is set automatically. If the picture is not displayed properly, set the
RGB mode prepared for the input signals listed in the table above.
*5 To connect the monitor to Macintosh computer, use the monitor adapter (D-Sub 15-pin) to your computer's video port.
*6 Other screen modes (ZOOM and STADIUM) are available as well.
*7 CVT standard compliant.
*8 Analog signal is not available.
*9 The text cannot be displayed at the "RIGHT" and "LEFT" location.
NOTE:
• While the input signals comply with the resolution listed in the table above, you may have to adjust the position and size of the
picture or the fine picture because of errors in synchronization of your computer.
• When a 1280 dots
• This monitor has a resolution of 1365 dots
or equivalent.
• With digital input some signals are not accepted.
• The sync may be disturbed when a nonstandard signal other than the aforementioned is input.
• If you are connecting a composite sync signal, use the HD terminal.
What is HDCP/HDCP technology?
HDCP is an acronym for High-bandwidth Digital Content Protection. High bandwidth Digital Content Protection (HDCP) is a
system for preventing illegal copying of video data sent over a Digital Visual Interface (DVI).
If you are unable to view material via the DVI input, this does not necessarily mean the PDP is not functioning properly. With
the implementation of HDCP, there may be cases in which certain content is protected with HDCP and might not be displayed
due to the decision/intention of the HDCP community (Digital Content Protection, LLC).
• "IBM PC/AT" and "XGA" are registered trademarks of International Business Machines, Inc. of the United States.
• "Apple Macintosh" is a registered trademark of Apple Computer, Inc. of the United States.
Sync Polarity
Horizontal
frequency Horizontal
(kHz)
60.0 64.6
NEG
71.2 75.1
NEG
72.0 78.1 – –
66.0 61.8
C Sync
76.0 71.7 C Sync
76.1 81.1
C Sync
60.0 49.7
– –
60.0 63.9
– –
50.0 31.4 NEG
59.9 31.5
NEG
1024 lines signal or 1600 dots
768 lines. It is recommended that the input signal should be XGA, wide XGA,
Presence
NORMAL
Vertical Horizontal Vertical
YES*
NEG YES YES
YES*
NEG YES YES
YES*
– – – – – –
C Sync – – – –
C Sync
– – – –
YES*
C Sync – – – –
YES*
– – – – – –
YES*
– – – – – –
YES*
NEG YES YES
YES*
NEG YES YES
1200 lines signal is input to the monitor, the picture will be compressed.
En-44
Screen mode
RGB
TRUE FULL select*
(4:3) (16:9)
3 – – YES 1280 1024
3 – – YES
– –
3 – – YES – –
YES – – YES – –
YES – – YES – –
3
– – YES – –
2 – – YES
1024 768
3 – – YES 1280 1024
6 – – YES* 6 – –
6 6
– – YES* 525P
TEXT
4 DVI Memory
INSERT
9
YES YES* 29
YES YES* 9
48
YES YES* 9 59
YES YES 60
YES YES 61
9
YES YES* 30
YES YES* 9 62
9
YES YES* 29
NO YES* 9 31
9
NO YES* 32