Option3 Settings Menu - NEC 60XM5 - PlasmaSync - 60" Plasma Panel User Manual

Setting the picture size for RGB input signals
Use this procedure to switch the setting to "ON" or "OFF".
* This function is available only for 50 and 60 inch types.
Example: Setting the "PICTURE SIZE" mode to
"OFF"
On "PICTURE SIZE" of "OPTION2" menu, select "OFF".
OPTION 2
PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
PROTOCOL SET
NEXT PAGE
SEL. ADJ.
Setting the signal and black level for DVI signal
Choose the signal for the DVI connector (PC or STB/
DVD) and set the black level.
Example: Setting the "PLUG/PLAY" mode to "STB/
DVD"
On "OPTION2" menu, select "DVI SET UP", then press the
MENU/ENTER button.
The "DVI SET UP" screen appears.
On "PLUG/PLAY" of "DVI SET UP" menu, select "STB/
DVD".
DVI SET UP
PLUG/PLAY
BLACK LEVEL
SEL. ADJ.
Information
PLUG/PLAY settings
PC: When connected to the PC signal.
BLACK LEVEL is set to "LOW" automatically.
STB/DVD: When connected to the SET TOP BOX,
DVD etc.
BLACK LEVEL is set to "HIGH" automatically.
BLACK LEVEL settings
LOW: When connected to the PC signal.
HIGH: When connected to the SET TOP BOX, DVD
etc. Change "HIGH" into "LOW" if the black level
appears gray.
Setting the Protocol set
Use this setting when connecting a device which uses
special protocol for RS-232C communication.
Example: Setting "ON"
On "PROTOCOL SET" of "OPTION2" menu, select "ON".
OPTION 2
PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
PROTOCOL SET
NEXT PAGE
SEL. ADJ.
Information
PROTOCOL SET settings
ON: When special protocol is used.
OFF: When NEC protocol is used (normal).
* Consult your dealer for details of protocol.
2 / 4
: OFF
: ON
: 3
: OFF
: OFF
: OFF
EXIT RETURN
: STB/DVD
: HIGH
EXIT RETURN
2 / 4
: OFF
: ON
: 3
: OFF
: ON
: ON
RETURN
EXIT
En-29

Option3 Settings Menu

Set "ADVANCED OSM" to "ON" in the MAIN MENU.
Using the timer
This function sets the day of the week and time. You can
also set the program timer which turns on or off the power
at the day of the week, time and the input mode you want,
or repeat timer which displays two input modes alternately.
On "OPTION3" menu, select "TIMER", then press the
MENU/ENTER button.
The "TIMER" screen appears.
TIMER
PRESENT TIME
TIMER
SEL. MENU/ENTER OK
PRESENT TIME
This sets the day of the week and present time.
Example: Setting "WEDNESDAY", "22:05"
On "TIMER" menu, select "PRESENT TIME", then press
the MENU/ENTER button.
The "PRESENT TIME" screen appears.
Adjust the items.
PRESENT TIME
RETURN
SUMMER TIME
WEDNESDAY
22 : 05 : 00
SET
SEL. ADJ.
Select "SET", then press the MENU/ENTER button.
The adjustments are stored and the TIMER menu reappears.
* If you press the EXIT button instead of the MENU/ENTER
button, the settings can not be made.
PRESENT TIME
RETURN
SUMMER TIME
WEDNESDAY
22 : 05 : 00
SET
SEL. MENU/ENTER OK
Information
PRESENT TIME settings
SUMMER TIME: Use to set SUMMER TIME.
ON: The present time + 1 hour.
OFF: Cancelled
Day: Set the day of the week (e.g. Sunday).
Hour: Set the hour in the 24-hour format (range 00 to
23).
Minutes: Set the minutes (range 00 to 59).
: OFF
EXIT RETURN
: OFF
EXIT RETURN
: OFF
EXIT RETURN