Juniper NETWORK AND SECURITY MANAGER - RELEASE NOTES REV 1 Release Note page 23

Known Issues
464094—NSM allows you to create IPv6-based DIP objects when the IPv6 mode is
set to none.
464145—The VPN monitor does not display content for the Local address and Peer
address fields.
464404—When existing custom virtual routes are configured using a template, you
see a Revert to template/default value option when you right-click on the virtual
router name field. If you select this option, the virtual router name becomes a null value
and you see a validation error.
464834—In the NSMXpress multi-user access feature, you can map predefined users
such as nsm and cfmuser to have access to the WebUI. However, these predefined
users cannot log in because they do not have the defined password. We recommend
that you do not map predefined users to WebUI users through UNIX authentication.
465023—The quick configuration editor Interfaces page is not refreshed when an
interface is edited from a regular config editor. Functional zone tables are not validated
when any node under functional zones is configured.
465407—NSM allows to you to configure IPv6 options on a device running ScreenOS
6.3 even after IPv6 is disabled on that device.
465748—If you try to download the NSM client from an NSMXpress appliance with a
different NSM UI client version, NSM prompts you to download the client from the
server, but the download fails. A workaround is to download the client directly from
the NSM server ( https://ApplianceIP ) or change the guiSvrWebProxy.port value to 443
in .
/var/netscreen/GuiSvr/guiSvr.cfg
466039—The Interface Quick Configuration landing page usually shows "Could not
Create View" for EX Series, MX Series, and SRX Series devices.
466233—After configuration, the routing table of model vsys devices does not display
IPv6 route entries. However, the same route entries are visible in the delta config
summary and are successfully updated in the device. A workaround is to import the
vsys device.
466335—You cannot change the superuser password from the WebUI of an NSMXpress
device.
466349—NSM does not filter IPv6 policy rules from the Central Manager during an
update to a ScreenOS device that does not support IPv6.
466934—The NSM database backup operation fails to execute from the WebUI on
NSMXpress devices. The workaround is to log off, then log back in and execute the
operation again.
467745—The NSM 2008.2r2 client often displays an empty device list.
468189—When migrating from NSM 2008.2R2a to 2009.1, the installer script does
not display the version correctly. NSM 2008.2r2a is displayed as 2008.2r2.
472185—The NSM Device monitor and the VPN Monitor are slow to detect changes in
state.
Copyright © 2010, Juniper Networks, Inc. 23