Juniper NETWORK AND SECURITY MANAGER - RELEASE NOTES REV 1 Release Note page 27

Known Issues
519447—The Only this Value and Not this Value filters in the Log Viewer do not work
for IPv6 Src, Dst, Src NAT, and Dst NAT address objects.
521704—An NSM user is able to delete the user role logged in as from NSM.
521930— The Junos OS applications node in templates shows extra options that are
not present in the actual device for both predefined and custom applications.
522853— Modification of a modeled vsys configuration does not work on an
ISG2000-IDP device.
523092—NSM does not allow selection of the dates of March 29, 30, and 31 while
creating a new log report.
523099— NSM displays deleted vsys information.
523176—For log reports, if Columns for Report is selected with IPv6 address fields, the
report displays an extra IP 0.0.0.0.
523190—Username and Password text boxes are displayed only when Authentication
Type is initially set as Certificate and then set back to Basic.
523484—NSM displays the wrong version number after performing a software upgrade
for devices running the Junos OS.
524124—NSM shows the configuration status of a device as Managed,InSync after
successfully importing a configuration file exported from the same device. The
workaround is to update the device after importing the configuration file.
524216—Predefined Junos OS service objects junos-persistent-nat and junos-stun
are not available in NSM.
526007—Resetting to Factory Defaults does not work after performing Offline Update
Recovery Partition on an NSM3000 appliance. The workaround is to reinstall the
image through USB.
526499—After upgrading to NSM 2010.2, when checking the HA server version, the
highAvailSvr process displays the current version as 1.13.1 instead of 2010.2, and also
displays old versions.
527833—NSM does not support the CLI command for high-end SRX
ip-monitoring
Series devices in HA configuration.
529623—During a device update, NSM attempts to unset the valid loopback interface
configuration and the associated MIP for an ISG1000 Series device.
562393—When SRX low-end family devices (which have been renamed from 10.2)
are added through model or unreachable workflow, the Managed OS version support
drop down list in NSM must display operating systems only up to 10.1. However, the
list displays 10.2 and 10.3 too.
Copyright © 2010, Juniper Networks, Inc. 27