Juniper NETWORK AND SECURITY MANAGER - RELEASE NOTES REV 1 Release Note page 13

Addressed Issues
499688—You cannot use the NSM GUI to remove an IDP platform from a custom IDP
attack signature.
499748—When a packet capture (pcap) is requested and it contains VLAN traffic,
NSM replies with a JAVA Null pointer exception.
500367—Policy update in NSM fails intermittently, displaying a Java NullPointer
Exception.
500769—NSM does not support PPP and PPP-service protocols on J Series devices
with a 10.0r1.8 image.
500838—The timeout value defined in a custom service object is not updated to an
SRX Series device.
501875—An SRX Series device will be shown as down if the primary GUI server fails
over to the secondary and a device connection is not established in extended HA.
502166—The NSM GUI crashes while viewing audit log details.
502223—When importing an NS-5GT in Home-Work port mode with DHCP DNS Options
set, NSM attempts to unset these options at the next update.
502390—If you use NSM 2009.1 and want to upload either the SA 6.5r2 or IC C3.1r2
software into NSM, you must run a Juniper Networks Update to enable subsequent
device software upgrades through NSM.
502893—When VPN Manager is set to automatically generate static routes, it ignores
the default route preference set in the corresponding virtual router.
503179—Logs are not getting parsed because of file header corruption, resulting in a
devSvrManager crash with core.
503231—A subinterface cannot be created on a serial interface on the SSG-20 platform
as the interface is not displayed in the NSM GUI.
504414—NSM does not allow creation of an rpc-program-number in a custom service
object if UDP or TCP services are selected.
504457—NSM unsets the value of lifetime kilobytes from custom phase 2 proposals
after import from a device to NSM.
505169—In NSM, the log filter is getting created only for the group and host address
objects and not for the network address object when you create the filter by
right-clicking the source or destination address column within a log.
507098—A GuiServer Manager core dump occurs when compiling IDP policies.
509454—NSM overrides previous rule parameters when a duplicate policy ID is present
in a rule.
511486—An SRX Series device is displayed as a ScreenOS device in the NSM device
manager after a schema upgrade to 124.
512215—When editing an imported firewall cluster configuration, even if the VR is shared
NSM displays the following error message on the zone: "Shared zone must be in shared
VR."
Copyright © 2010, Juniper Networks, Inc. 13