Juniper NETWORK AND SECURITY MANAGER - RELEASE NOTES REV 1 Release Note page 21

Known Issues
439909—NSM API cannot log in using a user defined inside a subdomain. Login for a
subdomain must be specified in the form of "global.subdomainname" instead of just
the subdomain name.
402298—When you apply a firewall policy with network address objects to devices
running Junos OS, the device update operation in NSM fails, because DMI devices do
not support network address objects.
443271—When a device reboots, the hardware-inventory status may be set to
out-of-sync in NSM even when there is no change in the device's hardware. A
workaround is to refresh the inventory. The status reverts to in-sync in NSM.
449502—SA devices with HOST CHECKER policies for admin user cannot be added
and managed by NSM.
446392—When migrating from 2007.3R1 to 2008.2R2, NSM unsets the loopback and
subinterface configurations created in the 2007.3R1 setup. Migration from 2007.3R4
to 2008.2R2 succeeds.
450863—NSM does not display a validation error if an IPv4 address is added to an
IPv6 address group using the Replace with option.
450906—When an interface is configured in the IPv6 host/router mode, NSM does
not show or generate the interface ID which is generated by default in the device.
Instead NSM generates an interface ID randomly.
450964—When you log in to NSM for the first time on the NSMXpress appliance, the
System Information page opens first instead of the Install NSM page.
452182—While searching for IPs using the Global Search feature, you can search for a
specific IP address and netmask. However, you cannot search for all IP addresses in a
particular subnet. You also cannot search for all IPs beginning or ending with a particular
number.
452960—To create a multiple IP range DIP, you must configure the extended IP under
two options: Device supporting IPv6 and Device not supporting IPv6.
452898—The sequence of nodes under the Network tab changes when an interface
is configured. Closing and reopening the interface window restores the original order
of nodes.
453968—The Search option under IPv6 and IPv4 policies does not allow you to enter
a complete string or word.
454983—The device cannot send the configuration file to the NSM server after a
commit. The workaround is to run the passwd cfmuser command as root on the
NSMXpress device and enter the same password configured during install.
455944—Under the Route-map, the Metric Options field entries and Local Preference
values are not properly displayed on the template.
457072—In NSM, you cannot create node-specific entries for a cluster.
457242—The graph in myreport displays 0.0.0.0 before displaying the correct IPv6
address.
Copyright © 2010, Juniper Networks, Inc. 21