Juniper NETWORK AND SECURITY MANAGER - RELEASE NOTES REV 1 Release Note page 22

Network and Security Manager 2010.4 Release Notes
22
457557—When you log in to NSM as a custom administrator in a custom role with a
Create Security Policies privilege and create a new policy with an IPv6 rulebase, a
Java Null Pointer error is shown for the rulebase.
458585—NSM does not display a validation error for an invalid Attack Database Server
path: Device > Security > Expand Attack DB > Settings.
459052—While creating gateway VPN settings, the NSM update often sends the
following commands:
set ike gateway g1 dpd-liveness interval 0
set ike gateway g1 dpd-liveness retry 5
unset ike gateway g1 dpd-liveness always-send
unset ike gateway g1 dpd-liveness reconnect
unset ike gateway g1 nat-traversal
459323—NSM does not display validation error messages for low or high values under
Destination or Source ports.
459330—NSM fails to update the PBR match-group, Action-Group, and PBR policy
names if the name string contains spaces.
459949—When AVT is enabled on a device, the Profiler is not automatically enabled
during a device restart. The workaround is to right-click on the device and select Start
profiler.
460492—When installing a system update on RHEL 4.6, you receive a warning for the
SE Linux package. However, the installation works.
460645—The default screen view does not display all the options under Devices >
Configuration > Update Device Config > ScreenOS and IDP options. The workaround
is to extend the length of the window to view all the options.
460894—The NSM Object Manager does not display Zone object details.
461192—NSM displays all the interfaces under the Route-map > Match Interface list
instead of displaying only the configured interfaces.
461266—NSM topology displays different icons for the M10i, MX480, J4300, and other
routers.
463254—The order of nodes under the Network tab changes if the Transparent mode
option is checked for a template. Closing and reopening the template restores the
original order of nodes.
463738—When you model a device enabled with a transparent interface, the interface
is incorrectly displayed as Route mode in the device configuration, and you cannot edit
the mode field.
463788—The NSM UI displays a validation error for Route-map strings when
Route-maps are configured without any entries such as permit/deny, match, set, and
Metric Parameters.
464029—NSM incorrectly displays the validation "IP Address can't be unset since
it's being used by VPN" on an IPv6 VPN though the IPv6 address is part of the VPN.
464071—SCTP, UTM, and GTP objects are visible in the expanded display mode after
they have been deleted from the policy.
Copyright © 2010, Juniper Networks, Inc.