Juniper NETWORK AND SECURITY MANAGER - RELEASE NOTES REV 1 Release Note page 6

Network and Security Manager 2010.4 Release Notes
6
Repeat Step 3b through Step 3d for all of the Infranet Enforcers.
e.
On the Infranet Controller, select UAC > Infranet Enforcer > Connection and
f.
check that all the Infranet Enforcers have been added.
On NSM, delete the Infranet Enforcer firewalls from the global domain:
4.
In the global domain, select Device Manager > Devices to list all the devices.
a.
Right-click each Infranet Enforcer firewall device and select Delete from the list.
b.
On NSM, delete the $infranet instances from the Object Manager:
5.
Select Object Manager > Authentication Servers.
a.
Right-click each $infranet_n object and select Delete from the list.
b.
Select VPN Manager > VPNs, and check that you do not have any $infranet objects
c.
under VPN Manager. These objects are usually deleted automatically when you
remove the firewall.
Create a new subdomain for the Infranet Enforcers:
6.
Select Tools > Manage Administrators and Domains.
a.
Select the Subdomains tab.
b.
Click the Add icon.
c.
In the New Subdomain dialog box, enter an appropriate name for the subdomain
d.
so you know what it will be used for, and then click OK.
From the drop-down list at the top left side, select your new domain. The new
e.
domain is empty, but it can use objects from the global domain. If you do not
remove the $infranet instances from the main domain, you risk having duplicate
$infranet names. In addition, add a Single Infranet Enforcer or Infranet Enforcer
Cluster.
Repeat Step 5 and Step 6 for every Infranet Enforcer or Infranet Enforcer Cluster
f.
you need to add to NSM. When finished, you should see $infranet instead of
$infranet_# in each of the domains except global.
In NSM, add the Infranet Enforcer objects to the new domain:
7.
Select Device Manager > Devices.
a.
Click the Add icon, and then select Device to start the Add Device Wizard.
b.
In the New Device window, provide a name for the device, a color for its icon in
c.
NSM, and check Device is Reachable.
Follow the instructions in the wizard to add and import the device.
d.
Repeat Step 7b through 7d for each Infranet Enforcer device.
e.
Copyright © 2010, Juniper Networks, Inc.