Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
Packet-based processing
Stateless packet-based services option
For more information, see Junos OS Security Configuration Guide for J Series Services
Routers and SRX Series Services Gateways, Chapter 1, Introducing Junos OS for SRX Series
Services Gateways and Chapter 3, Introducing Junos OS for J Series Services Routers.
Intrusion Detection and Prevention (IDP)
IDP Policy
Intrusion prevention system (IPS) rulebase
Differentiated Services code point (DSCP) marking
IDP signature database
Application identification
IDP logging
For more information, see Junos OS Security Configuration Guide for J Series Services
Routers and SRX Series Services Gateways, Chapter 22, IDP Policies. For information on
IDP monitoring and debugging, see the Junos OS CLI Reference for J Series Services Routers
and SRX Series Services Gateways.
IPsec
Policy-based and route-based VPNs
Tunnel mode
Authentication Header (AH) protocol
Encapsulating Security Payload (ESP) protocol
IKE phase 1
IKE phase 2
Manual key management
Autokey management
Antireplay (packet replay attack prevention)
Dead peer detection (DPD)
For more information, see Junos OS Security Configuration Guide for J Series Services
Routers and SRX Series Services Gateways, Chapter 18, Internet Protocol Security.
Network Address Translation (NAT)
Destination IP address translation
Static NAT
Rule-based NAT
Source IP address translation
Chapter 1: LN1000 Mobile Secure Router Overview
9
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOS OS 10.3 - LN1000 MOBILE SECURE ROUTER USER GUIDE 8-26-2010 and is the answer not in the manual?