Tanita SC-330ST Instruction Manual page 9

Various settings
GB
Select the measurement flow
Press and then press
3
8
• The "ON or OFF of the one step mode" selection screen is
displayed.
• The one step mode is
Note
e a mode to measure body weight after inputting
personal information.
Set ON or OFF of the one step mode
4
when using the body composition
analyzer.
• The default is "0. off." ("1. ON" for valid, "0. off" for
Note
invalid.)
• To correct the input value, or cancel the input,
e press (the input is deleted).
CE
After inputting the numeric value,
5
press
Enter / Next
• It returns to the "setting item selection" screen.
Set ON or OFF of the athletic mode selection
3 Press and then press
9
• The "Set ON / OFF of the athletic mode selection" setting screen
is displayed.
Set ON or OFF of the athletic mode selection
4
when using the body composition analyzer.
• The default is "1. on." ("1. on" for valid, "0. off" for
Note
invalid.)
• To correct the input value, or cancel the input,
e press (the input is deleted).
CE
After inputting the numeric value,
5
press
Enter / Next
• It returns to the "setting item selection" screen.
* When various settings are continuously carried out,
Note
e press each number to set.
* The set contents are memorized until they are changed next time.
16
Setting methods (continued)
(Continued from page 10).
.
Enter / Next
.
(Continued from page 10).
.
Enter / Next
.
* Invalid in st.lb mode.
Set the input unit of height
Press and then press
3
1 0
.
Enter / Next
• The "input unit of height" selection screen is displayed.
Selects the input unit of height.
4
• The default is "1. on."
Note
0. off: sets 0.1 cm unit input
1. on: sets 1 cm unit input
• To correct the input value, or cancel the input,
e press (the input is deleted).
CE
After inputting the numeric value,
5
press .
Enter / Next
• It returns to the "setting item selection" screen.
Set the automatic determination time when inputting
Press and then press
1 1
3
.
Enter / Next
• The "automatic determination time when inputting" setting
screen is displayed.
• Automatic determination when inputting is,
Note
e a function to determine the input value automatically even without pressing
, after inputting the numeric value.
Enter / Next
Set the automatic determination time
4
when inputting.
• The default is 5 seconds ("5"). (input range: 0 – 9).
Note
*If "0" is set, it is not automatically determined.
• To correct the input value, or cancel the input,
e press (the input is deleted).
CE
After inputting the numeric value,
5
press .
Enter / Next
• It returns to the "setting item selection" screen.
* When various settings are all completed,
e press on the "setting item selection screen" (it returns to the preset tare input screen).
Set Up
(Continued from page 10).
(Continued from page 10).
GB
17