Tanita SC-330ST Instruction Manual page 17

Operating Instructions
GB
Input the age.
7
Input it by pressing –
0
Note
• The age can be input from 5 – 99.
• If it is mistakenly input,
e press (the input is deleted).
CE
• If is pressed in the state that the age is not
CE
input, it returns to the "gender selection" screen.
8 Press
Enter / Next
When the age is input, the lamp flashes on the
"Height".
Input the height.
9
Input it by pressing –
0
Note
• The height can be input from 90.0 - 249.9 (90 - 249)
or 3 ft -7 ft 11.5 in.
*0.1cm (1cm) / 0. 5in increments
*Unit is changed by
• If it is mistakenly input,
e press (the input is deleted).
CE
• If is pressed in the state that the height is not input, it returns to the "age selection" screen.
CE
10 Press
Enter / Next
The "Step on" lamp flashes.
Note
• When is pressed, it returns to the previous
CE
screen.
32
when using as a body
.
9
.
.
9
key.
.
composition analyzer(continued)
Step on the electrodes with bare
11
feet.
Take off your socks and stockings before stepping on.
Under measurement of the body
12
composition.
display goes off sequentially.
Measurement completion
13
The measurement result and the body fat percentage
evaluation are displayed.
It is automatically printed out. (In the case that other
than 0 is set in the "Setting the number of sheets to
print" ( page 13).
Note
• Fat % Healthy range is not displayed if OFF is set
in the "setting ON or OFF of the Fat % Healthy
range display" ( page 15).
Step off the platform.
It returns to the "ID input" screen.
Note
• The "body type selection" screen is displayed in
the case that OFF is set in the "setting with or
without an ID" ( page 15).
How to read the display <kg mode>
Judgment result
based on the body
fat percentage.
( page 38.)
How to read the display <st.lb mode>
Judgment result
based on the body
fat percentage.
( page 38.)
33
GB