Tanita SC-330ST Instruction Manual page 16

Body composition analyzer
Table of Contents

Advertisement

Operating Instructions
GB
In the case of the one step mode
In the one step mode, after inputting the personal data, the weight and body composition are measured.
s
Personal data input
Weight measurement
1
Press
to turn on the
power.
Check that the body composition is selected,
2
input the clothes weight.
Input it by pressing
0
Note
• The clothes weight (preset tare) can be input in the
range of 0.0 – 10.0 kg or 0.0 - 20.0 lb.
*0.1kg / 0.2lb increments
*Unit is changed by
• st. is not available when entering clothes weight.
• If it is mistakenly input,
e press
(the input is deleted).
CE
3
Press
Enter / Next
Note
• This screen is not displayed if OFF is set in the
"setting with or without an ID" (
(The "body type selection" screen is displayed.)
30
when using as a body
s
Body composition measurement
(kg mode)
.
9
key.
.
page 15).
composition analyzer(continued)
Input the ID number.
4
Input it by pressing
-
.
Note
• This screen is not displayed if OFF is set in the
"setting with or without an ID" (
• The ID number can be input from 0 – 9999999999. If
is pressed, the non-inputted digits are
Enter / Next
filled with 0s.
• If it is mistakenly input,
e press
(the input is deleted).
CE
• If
is pressed in the state that an ID number is not input, it returns to the "measurement
CE
start" screen.
Select the body type.
5
Press the body type selection keys to input.
When the body type is selected, the lamp flashes on
the "Gender".
Note
• This screen is not displayed if OFF is set in the
"setting ON or OFF of the athletic mode selection"
(
page 16).
• The body type can also be selected with the numeric keys (
• If it is mistakenly input,
e press
(the input is deleted, and it returns to the "body type selection" screen).
CE
• If
is pressed in the state that the body type is not input, it returns to the "ID number input"
CE
screen (or "measurement start" screen).
Select gender.
6
Press the male / female selection keys to input.
When male or female is selected, the lamp flashes on
the "Age".
Note
• If it is mistakenly input,
e press
(the input is deleted, and it returns
CE
to the "gender selection" screen).
• If
is pressed in the state that the male or female is not selected, it returns to the "body type
CE
selection" screen.
page 15).
).
1
2
GB
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-330

Table of Contents