Tanita SC-330ST Instruction Manual page 15

Operating Instructions
GB
Input the age.
9
Input it by pressing –
0
Note
• The age can be input from 5 – 99.
• If it is mistakenly input,
e press (the input is deleted).
CE
• If is pressed in the state that the age is not
CE
input, it returns to the "gender selection" screen.
10 Press
Enter / Next
When the age is input, the lamp flashes on the
"Height".
Input the height.
11
Input it by pressing –
0
Note
• The height can be input from 90.0 - 249.9 (90 - 249)
or 3 ft -7 ft 11.5 in.
*0.1cm (1cm) / 0. 5in increments
*Unit is changed by
• If it is mistakenly input,
e press (the input is deleted).
CE
• If is pressed in the state that the height is not input, it returns to the "age selection" screen.
CE
12 Press
Enter / Next
Under measurement of the body
13
composition.
display goes off sequentially.
28
when using as a body
.
9
.
.
9
key.
.
composition analyzer(continued)
Measurement completion
14
The measurement result and the body fat percentage
evaluation are displayed.
It is automatically printed out. (In the case that other
than 0 is set in the "Setting the number of sheets to
print" ( page 13).
Note
• Fat % Healthy range is not displayed if OFF is set
in the "setting ON or OFF of the Fat % Healthy
range display" ( page 15).
Step off the platform.
It returns to the "measurement start" screen.
How to read the display <kg mode>
How to read the display <st.lb mode>
GB
Judgment result
based on the body fat
percentage.
( page 38.)
Judgment result
based on the body fat
percentage.
( page 38.)
29