Accessories; Connecting Flanges; Transport - Dimplex SI 100ZS Installation And Operating Instructions Manual

ACCESSORIES

4

4.1 Connecting Flanges

The use of flat-sealing connecting flanges allows
the unit, as an option, to be connected by means of
flanges.

TRANSPORT

5
For the transport by means of a hand truck or
boiler trolley, position the latter under the front
end of the unit below the transport security device.
For transport on a level surface, the unit can be
lifted from the rear or from the front by means of a
lift truck or forklift. In this case, the transport
securing device is not imperative.
45°
CAUTION!
The heat pump must not be tilted
more than max. 45
After the transport, the transport securing device
is to be removed on either side at the bottom of
the unit.
CAUTION!
The transport securing device is to
be removed after the transport.
5
ACCESSORIES
TRANSPORT
45°
°
(in either direction).
Remove/install transport
securing device