Administration Settings; Administrative Access - D-Link DFL-700 - Security Appliance Product Manual

Administration Settings

Administrative Access

Management UI Ports – The ports for the DFL-700's Web Server Management UI (HTTP
and HTTPS) can be customized if so desired.
Authentication is enabled (User Authentication uses 80 and 443 to accomplish user login).
Ping – If enabled, it specifies who can ping the IP interface of the DFL-700. Enabling
Default allows anyone to ping the interface IP.
Admin – If enabled, it allows all users with admin access to connect to the DFL-700 and
change configuration; this can be HTTPS or HTTP and HTTPS.
Read-Only – If enabled, it allows all users with read-only access to connect to the DFL-
700 and look at the configuration; this can be HTTPS or HTTP and HTTPS. In the case
where Read-Only access is the only type allowed on a specific interface, all users that log
in to that interface will be in Read-Only mode.
These values must change if User
12