Administration Settings; Administrative Access - D-Link DFL-1100 Manual

Hide thumbs Also See for DFL-1100:

Table of Contents

Administration Settings

Ping – If enabled, specifies who can ping the interface IP of the DFL-1100. Default if

enabled is to allow anyone to ping the interface IP.

Admin – If enabled allows all users with admin access to connect to the DFL-1100 and

change configuration, can be HTTPS or HTTP and HTTPS.

Read-Only – If enabled allows all users with read-only access to connect to the DFL-1100

and look at the configuration, can be HTTPS or HTTP and HTTPS. If there is no Admin

access specified on an interface and only read-only, admin users can still connect but will be

in read-only mode.

SNMP – Specifies if SNMP should be allowed or not on the interface, the DFL-1100 only

supports read-only access.

Table of Contents