Administration Settings; Administrative Access - D-Link DFL-1100 User Manual

Administration Settings

Administrative Access

Management UI Ports – The ports for the DFL-1100's Web Server Management UI
(HTTP and HTTPS) can be customized if so desired. These values must change if User
Authentication is enabled (User Authentication uses 80 and 443 to accomplish user login).
Ping – If enabled, it specifies who can ping the IP interface of the DFL-1100. Enabling
Default allows anyone to ping the interface IP.
Admin – If enabled, it allows all users with admin access to connect to the DFL-1100 and
change configuration; this can be HTTPS or HTTP and HTTPS.
Read-Only – If enabled, it allows all users with read-only access to connect to the DFL-
1100 and look at the configuration; this can be HTTPS or HTTP and HTTPS. In the case
where Read-Only access is the only type allowed on a specific interface, all users that log
in to that interface will be in Read-Only mode.
12