Change Administrative User Access level
To change the access lever of a user click on the user name and you will see the following
screen. From here you can change the
access level by entering the appropriate
level in the Group Membership field.
Access levels
•
Administrator – the user
can add, edit and remove
rules
settings.
•
Read-only – the user can
only
configuration of the firewall.
•
No Admin Access – The
user is only used for user
authentication.
Follow these steps to change Administrative User Access level.
Step 1. Click on the user you would like to change level of.
Step 2. Choose the appropriate level by entering into the Group Membership Field.
Click the Apply button below to apply the setting or click Cancel to discard changes.
Change Administrative User Password
To change the password of a user click on the user name and you will see the following
screen.
Follow
these
Administrative User password.
Step 1. Click on the user you would like
to change level of.
Step 2. Enable the Change password
checkbox.
Step 3. Enter the new password twice.
Click the Apply button below to apply the setting or click Cancel to discard changes.
Note: The password should be at least six characters long. The password can contain
numbers (0-9) and upper and lower case letters (A-Z, a-z). Special characters and spaces
are not allowed.
and
change
all
look
at
the
steps
to
change