Small Belt Removal/Replacement - Bissell Lift-Off 10N4 Series User Manual

M
aintenance and care
Small belt removal and replacement (as needed)
Occasional replacement of one or
both belts may become necessary.
If that is needed, please follow the
instructions below.
1. Turn off the machine, and unplug it from
the outlet. Remove portable spot cleaner.
2. Remove the nozzle assembly from the
machine. Refer to step 2 on page 10.
3. Turn the machine on its side.
IMPORTANT: with portable spot
cleaning pedal facing down.
4. Remove end cap by unscrewing the
3 screws. Take care not to drop the
screws into the unit.
5. Remove 1 silver screw from the
pivot arm.
6. Remove pivot arm by gently lifting up.
7. Remove small brush belt.
8. Replace small brush belt, and reverse
steps above.
9. Manually rotate brushes by hand to
make sure they move freely. May notice
a slight resistance from the motor.
14
w w w . b i s s e l l . c o m
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
2.
4.
6.
7.
5.
8.