4.Selecting Finishing Modes (Cont.)
Hole punch mode (optional)
When the Hole Punch Unit (optional) is installed to the finisher (optional), you can punch holes in the cop-
ies.
•
The available copy paper sizes for this mode are LD, LG, LT, LT-R and COMP.
•
The paper weight applicable for this mode is 17 lb. Bond to 110 lb. Index.
•
Special paper such as OHP films or sticker label cannot be used for hole punching.
1
Place paper in the drawer(s).
• When using this mode in bypass copying, specify the paper size in advance. (! P.58 "3.Bypass Copying")
3
Place the original(s).
2
Press the finisher button on the basic menu.
3
Press the [HOLE PUNCH] button.
4
• Set other copy modes as required.
Press the [START] button.
5
93
3.SETTING BASIC COPY MODES