Bridge Kit; Finisher And Hole Punch Unit - Oki ES9476 MFP Hardware Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
 Bridge Kit
Open the cover holding the handle of the Bridge Kit.
1
Remove the jammed paper inside the Bridge Unit.
2
If the jammed paper cannot be removed because the right side is caught by the fuser unit, follow the steps on 
P.34 "Fuser unit".
Close the Bridge Kit cover.
3
 Finisher and Hole Punch Unit
Paper jam in the upper receiving stacker
1 Raise the lever and open the upper receiving stacker of the finisher.
Remove the jammed paper.
2
36 Clearing a Paper Jam