Oki CX1145 MFP Printing Manual page 318

How the equipment performs printing for an invalid department code print job, which no depart-
ment code or invalid department code is specified, varies depending on the Department Code
Enforcement setting that can be set from TopAccess Administrator mode. When the Depart-
ment Code Enforcement is set to "ON", the invalid department code print job will be stored in the
invalid department code print job list without printing. When the Department Code Enforcement
is set to "Print", the invalid department code print job will be printed. When the Department
Code Enforcement is set to "Delete", the invalid department code print job will be deleted without
printing.
1) Department Code (DC) - Digit 1
Select the first digit of the department code.
2) Department Code (DC) - Digit 2
Select the second digit of the department code.
3) Department Code (DC) - Digit 3
Select the third digit of the department code.
4) Department Code (DC) - Digit 4
Select the forth digit of the department code.
5) Department Code (DC) - Digit 5
Select the fifth digit of the department code.
— Booklet
In the Booklet menu, you can set booklet printing.
1
2
3
4
1) Booklet Paper Size
Select a paper size for the booklet. Each two pages are printed on both side of a sheet
which is then folded. The booklet size will be the half size of the paper size that you specify.
2) Left to Right Page Layout
Check this to create a booklet can be read from left to right.
3) Booklet Center Margin
Select the width of space added to the center.
4) Booklet Outer Margin
Select the width of space added short edge side of a sheet.
Printing from Application on Mac OS X 10.2.4 to Mac OS X 10.4.x 317