Installing Client Software For Novell Printing - Oki CX1145 MFP Printing Manual

1100 series
Hide thumbs Also See for CX1145 MFP:
Table of Contents

Advertisement

2 Installing Client Software for Windows

Installing Client Software for Novell Printing

This section describes how to install the client software for Novell printing on NetWare print
server environments.
There are two ways to set up the printer drivers for Novell printing:
Using the installer in the Drivers & Network Utilities CD-ROM
When you insert the Drivers & Network Utilities CD-ROM into your CD-ROM drive, the
installer automatically starts. You can install printer drivers and other client software using
the installer. If you want to install printer drivers as well as other client software, this method
is convenient.
P.125 "Installation for Novell Printing Using the Installer"
Using Point and Print
You can install the printer driver by double-clicking network queues on the NetWare. If the
NetWare has been set up for NDPS, printer drivers can be downloaded from the system so
that the Drivers & Network Utilities CD-ROM is not required. However, other client software
cannot be installed using this method.
P.130 "Installation for Novell Printing by Point and Print"
In addition to the above methods, you can also install the printer driver using Add Printer Wizard.
The printer driver that is installed by Add Printer Wizard is set up same as Point and Print.
Before installing the printer driver for Novell printing, check with your system administrator to
make sure of the following:
-
This equipment is connected to the network and turned on.
-
The NetWare server is configured correctly and running on your network.
-
The IPX/SPX or TCP/IP, and NetWare settings are correct on this equipment.
Before installing the client software for Novell printing, please make sure following network ser-
vices and protocols are installed on your computer:
Windows 98/ME
TCP/IP protocol (Required only when using the NetWare in the TCP/IP network.)
Novell Client 3.4
Windows NT 4.0
TCP/IP protocol (Required only when using the NetWare in the TCP/IP network.)
Novell Client 4.9 SP1a
Windows 2000/XP/Server 2003
TCP/IP protocol (Required only when using the NetWare in the TCP/IP network.)
Novell Client 4.91 SP2
Novell Client is not included in the Drivers & Network Utilities CD-ROM. Novell Client can be
downloaded from the Novell Inc. homepage.
124

Installing Client Software for Novell Printing

Advertisement

Table of Contents
loading

Table of Contents