When Paper Misfeeds; Misfeed Location Indications; Cautions - Kyocera KM-1510 Instruction Handbook Manual

2. When paper misfeeds

If a paper misfeed occurs, copying will stop. An indication signaling a paper misfeed appears on the operation panel and an indicator lights showing
the location of a paper misfeed. Remove the misfed paper by referring to "(3) Removal procedures" on page 7-5, with the main switch in the ON (|)
position.

(1) Misfeed location indications

1 Misfeed in paper feed section (page 7-5)
"PF" appears on the copy quantity display and the upper drawer
indicator, lower drawer indicator or multi-bypass indicator flashes
green.
2 Misfeed in left cover (page 7-5)
"J15", "J20", "J21", "J22", "J30", "J40", "J50" or "J95" appears on
the copy quantity display and the misfeed indicator lights red.
3 Misfeed in DF (page 7-7)
"J70", "J72" or "J73" appears on the copy quantity display and the
DF indicator lights red.
* When "E70", "E71" or "E72" is displayed, see page 7-3.
4 Misfeed in drawer <optional> (page 7-8)
"J15" appears on the copy quantity display and the lower drawer
indicator flashes green.
* When "J96", "J97", "J98" or "J00" is displayed, see page 7-3.
3 2 1 4
CHAPTER 7 WHEN A PROBLEM OCCURS

(2) Cautions

WARNING
High voltage is present in the charger section. Take
sufficient care when working in this area, as there is a
danger of electrical shock.
CAUTION
The copier's fixing unit is extremely hot. Take sufficient
care when working in this area, as there is a danger of
getting burned.
* Do not reuse misfed paper.
* If paper is torn during removal, be sure to remove all loose scraps
from inside the copier, or they could cause misfeed later.
* After misfed paper has been removed, warm-up will begin. The
misfeed indicator will turn off and the copier will return to the same
settings prior to the misfeed.
7-4