Copier Default Setting; Default Settings - Kyocera KM-1510 Instruction Handbook Manual

CHAPTER 6

1. Default settings

The state the copier is in at the end of warm-up or when the Reset key is pressed is called the initial mode, and the function settings that are
automatically set for the initial mode are called the default settings. The default settings can be changed according to how you wish to use the
copier.
Setting codes are provided for the default setting items that have selection items. Only the number of the setting code appears on the copy quantity
display. See the "Setting code" column in the table below for the meanings of those numbers. Initial settings are indicated with an asterisk (*).
Default code
F01 User status report
F02 Image mode
F03 Exposure steps
F04 Auto exposure adjustment
F05 Text and photo original exposure
adjustment
6-1

COPIER DEFAULT SETTING

Setting item
Prints the details of the default settings.
Selects the image mode at power-on.
Changes the number of exposure steps for the manual
exposure mode.
Adjusts the overall exposure when using the auto
exposure mode. The larger the setting code number, the
darker the copy density.
Adjusts the exposure for when text and photo original is
selected for the image mode. The larger the setting code
number, the darker the copy density.
Setting contents Setting code
1: Auto Exposure
2: Text & Photo*
3: Photo
4: Text
1: 3 steps*
2: 5 steps
1: 1 Light
2: 2
3: 3*
4: 4
5: 5 Dark
1: 1 Light
2: 2
3: 3*
4: 4
5: 5 Dark