Kyocera KM-1510 Instruction Handbook Manual page 27

CHAPTER 5 FUNCTIONS
4 Press the 2 in 1/4 in 1 key to light the 2 in 1 indicator or 4 in 1
indicator.
(English text panel)
5 Set the originals.
* Before setting originals on the platen, make sure they are in
the correct sequence.
* With the 15 ppm copier, if "ON" is selected for "DF auto
start", scanning starts automatically when an original is set
in the DF (see page 6-3). Proceed to step 7.
6 Press the Start key.
* If originals are set in the DF on the 18 ppm copier, originals
are scanned one by one and copied.
(English text panel)
5-3
(Symbol panel)
(Symbol panel)
7 When scanning of the first original ends, "1" (number of
scanned originals) appears on the display. Place the next
original. When using the platen, press the Start key. Repeat
the same procedure for all the originals.
(English text panel)
8 When scanning of all the originals ends, press the Zoom
Input/Enter key or 2 in 1/4 in 1 key. Copying will start.
(English text panel)
(Symbol panel)
(Symbol panel)