Managing target device tasks using the OSCAR interface
From the Commands window, you can manage the switching system and user connections, enable
the Scan and Broadcast modes, and update the firmware.
Table 3.5: Commands to manage routine tasks for the target device
Feature
CO Status
Display Config
Run Diagnostics
Broadcast Enable
Scan Enable
User Status
Display Versions
Device Reset
To access the Commands window, complete the following steps:
1.
Press Print Screen. The Main window opens.
2.
Click Commands. The Commands window opens.
Figure 3.8: Commands window
Purpose
View the version and upgrade status of the CO cable.
View current display settings.
Configure and begin diagnostics on target devices.
Begin broadcasting to the target devices. Configure a target device list for
broadcasting under the Setup window.
Begin scanning the target devices. Set up a target device list for scanning in the
Setup window.
View and disconnect users.
View version information for the appliance as well as view and upgrade firmware for
individual CO cables.
Re-establish operation of the keyboard and mouse.
Chapter 3: Basic operations
31