Brother 1920CN - Color Inkjet - Fax Service Manual page 152

Selector
No.
1
| Not used.
6
Impedance switching control in
7
pulse dialing
Beep when the memory area for
8
the activity report becomes full
NOTE: Selectors 7 and 8 are applicable to the European version only.
Selector 8: Beep when the memory area for the activity report becomes full
l
If this selector is set to "1," the machine will beep when the memory area for the activity report
becomes full (as well as displaying a message on the LCD, prompting the output of the activity
report).
Selector
No.
1
| Not used.
3
Duty cycle control of pulsed current
4
for the heat-fixing unit
5 Drum cleaning prompt settings
6
| Not used.
8
NOTE: Selector 4 is applicable to the European version only.
Selector 4: Duty cycle control of pulsed current for the heat-fixing unit
l
Setting this selector to "1" activates the duty cycle control that suppresses the rush current. The
duty cycle is 10-ms ON and 20-ms OFF.
However, the duty cycle control may emit switching noise to the AC line. Depending upon the
codes and regulations in the country, this selector should be set to "0."
l Selector 5: Drum cleaning prompt settings
Setting this selector to "1" (OFF) deactivates all of the drum cleaning prompt settings enabled by
selectors 5 to 7 of WSW42.
WSW29
(Function setting 7)
Function
WSW30
(Function setting 8)
Function
V - 40
Setting and Specifications
0: OFF 1: ON
0: No 1: Yes
Setting and Specifications
0: OFF 1: ON
0: ON 1: OFF